LG Dryer Error Codes D80, D90, and D95: How to Fix Them (Solved)

by

LG dryers are known for their high quality and advanced safety features. One of the most notable safety features is the ability to display specific error codes when there is an issue with the dryer or ventilation system.

In this article, the focus will be on three of the most common error codes: D80, D90, and D95.

To start, it’s important to understand what each of these error codes means.

This guide will cover a wide range of modern LG dryer models, including popular ones such as DLEX2801W, DLEX3470V, and DLG5988W.

By the end of this article, readers will have a clear understanding of these common error codes and how to troubleshoot them effectively.

What Do the D80, D90, and D95 Error Codes Mean?

If the control panel of your dryer is displaying a D80, D90, or D95 error code, it indicates that there is a lint buildup obstructing the airflow through the ventilation system.

The higher the number following the “D,” the more obstructed the ventilation system is. To prevent overheating, the dryer will automatically turn off when these error codes appear.

It is crucial to address these error codes promptly, as overheating dryers are a leading cause of house fires in the United States.

How to Fix LG Dryer Error Code D80

When an LG dryer displays the D80 error code, it indicates that there is an 80% ventilation blockage. This means that the air exhaust is not able to push enough air out from the dryer, and the primary cause of this problem is a buildup of lint in the exhaust hose or another part of the ventilation system.

To resolve the D80 error code, the following steps can be taken:

  • Clean the lint filter and ensure that all the lint is removed before putting it back into place.
  • Disconnect the exhaust hose located at the back of the dryer and check if it is blocked. Remove any loose debris or lint from it.
  • Check the wall duct for blockages and remove them if any are found.
  • Check the outside vent for blockages and remove them if any are found.

After following these steps, the blockage causing the error code should have been found and removed, and the error code should disappear. If the error code persists, the dryer can be turned off and on to remove it.

It is important to regularly clean the lint filter and check the ventilation system to prevent the D80 error code from recurring and to keep the dryer functioning properly.

How to Fix LG Dryer Error Code D90

If your LG dryer is displaying the D90 error code, it means that the ventilation system is restricted by 90%. This will cause your dryer’s airflow to be weak and not strong enough to circulate hot air out of the dryer and through the vent.

To fix this error code, follow these steps:

  • Start by cleaning out the lint filter. Make sure to remove all the lint before putting it back into place.
  • Disconnect the exhaust hose at the back of the dryer. Check to see if it is blocked up, and if so, remove the loose debris/lint from it.
  • Check the wall duct for blockages, and if you find any, remove them.
  • Check the outside vent for any blockages, and if you find any, remove them.

By following these steps, you should have found and removed the blockage, and the error code will disappear. If necessary, turn your dryer off and on to remove the error code.

It is important to keep your dryer’s ventilation system clean to prevent future occurrences of the D90 error code.

Regularly cleaning the lint filter and checking for blockages in the exhaust hose, wall duct, and outside vent will help maintain proper airflow and prevent this error code from appearing.

How to Fix LG Dryer Error Code D95

When the display panel on an LG dryer shows the D95 error code, it means that the ventilation system is restricted by 95%.

This can cause the dryer’s airflow to be insufficient to circulate hot air out of the dryer and through the vent.

To resolve this issue, the following steps can be taken:

  • Clean the lint filter thoroughly.
  • Disconnect the exhaust hose located at the back of the dryer and check for any blockages. If any blockages are found, remove the debris using a vacuum cleaner or by hand.
  • Check the wall duct for blockages and remove any that are found.
  • Check the outside vent for blockages and remove any that are found.
  • After removing any blockages, turn the dryer off and on again. The error code should disappear.

It is important to note that if the error code persists after completing these steps, it may be necessary to seek professional assistance.

Additionally, it is recommended to clean the lint filter after each use to prevent future blockages and errors.

Related Articles

References