Samsung Dishwasher Error Codes (Answered)

by

Samsung dishwashers are known for their efficiency and reliable performance, but like any electronic appliance, they may encounter issues from time to time.

When your dishwasher encounters a problem, it typically displays an error code on its control panel.

These error codes can help you identify the underlying issue and resolve it effectively.

In this article, we will explore some common Samsung dishwasher error codes, what they indicate, and detailed solutions to troubleshoot these problems.

Samsung Dishwasher Error Codes (Answered)

1. “IE” Error Code:

What it means: The “IE” error code indicates that there is a water inlet error. This means that the dishwasher is not receiving enough water or is unable to fill with water properly.

Possible Solution:

  • Check the water supply: Ensure that the water supply valve to the dishwasher is fully open and that there are no kinks or blockages in the water inlet hose.
  • Clean the water inlet filter: The water inlet valve may be clogged with debris.
  • Shut off the water supply and remove the inlet hose. Clean the filter screen thoroughly and reattach the hose before turning the water back on.

Related Articles 

2. “OE” Error Code:

What it means: The “OE” error code indicates a drainage problem. The dishwasher is unable to drain water properly.

Possible Solution:

  • Check the drain hose: Ensure the drain hose is not kinked, clogged, or blocked. Clean any debris or obstructions from the hose to allow proper drainage.
  • Check the filter and drain pump: The dishwasher’s filter and drain pump might be clogged.
  • Access the filter and pump area (usually located at the bottom of the dishwasher) and clean it thoroughly.

Related Articles 

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments

3. “LE” Error Code:

What it means: The “LE” error code indicates a leak detection problem. The dishwasher has detected a leak, and it is usually accompanied by water pooling on the floor around the appliance.

Possible Solution:

  • Inspect for leaks: Check the dishwasher’s door seal and ensure there are no visible tears, damage, or foreign objects that might prevent a proper seal.
  • Also, examine the water supply and drainage connections for any leaks.
  • Replace faulty parts: If you find any damaged seals or components responsible for the leak, replace them as necessary.

Related Articles

4. “HE” Error Code:

What it means: The “HE” error code indicates a heater error. The dishwasher’s heating element is malfunctioning.

Possible Solution:

  • Check the heating element: Inspect the heating element for any signs of damage or burning. If it’s faulty, you will need to replace it.

Related Articles 

5. “4E” Error Code:

What it means: The “4E” error code signifies a water supply error. The dishwasher is not getting enough water to function correctly.

Possible Solution:

  • Verify water pressure: Make sure the water pressure in your home is adequate. Low water pressure can affect the dishwasher’s performance.
  • Check the water inlet valve: The water inlet valve may be defective and needs replacement if it’s not allowing sufficient water to enter the dishwasher.

Related Articles 

6. “5E” Error Code:

What it means: The “5E” error code indicates a drain error. The dishwasher is unable to drain the water properly.

Possible Solution:

  • Verify the drain hose: Ensure the drain hose is properly installed, without any kinks or blockages.
  • Clean the drain filter and pump: The drain filter and pump might be clogged with debris. Access and clean these components to ensure proper drainage.

Related Articles 

7. “4C” Error Code:

What it means: The “4C” error code indicates a problem with the water supply system. It indicates that the dishwasher is not detecting water in the tub or not filling with water properly.

Possible Solution:

  • Check the water supply: Ensure that the water supply to the dishwasher is turned on and that there are no obstructions or kinks in the water inlet hose.
  • Inspect the water level sensor: The water level sensor may be faulty and not detecting the water level correctly.
  • If the sensor is defective, it may need replacement.

8. “5C” Error Code:

What it means: The “5C” error code points to a problem with the water drainage system. The dishwasher is not draining water properly.

Possible Solution:

  • Check the drain hose: Ensure the drain hose is not kinked, clogged, or blocked. Clean any debris or obstructions from the hose to allow proper drainage.
  • Inspect the drain pump: The drain pump may be malfunctioning and not effectively removing water from the dishwasher.
  • Check for any signs of damage or blockage and replace the pump if necessary.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments

9. “9E” Error Code:

What it means: The “9E” error code indicates a problem with the dishwasher’s water heating system.

Possible Solution:

  • Verify the water temperature: Make sure the water entering the dishwasher is hot enough.
  • If the water temperature is too low, the dishwasher’s heating element may not be able to heat it adequately.
  • Check your water heater settings and adjust if necessary.
  • Check the heating element: Inspect the dishwasher’s heating element for any signs of damage or burning. If it’s faulty, you will need to replace it.

Related Articles 

10. “HE1” Error Code:

What it means: The “HE1” error code points to an issue with the dishwasher’s heater circuit.

Possible Solution:

  • Check the wiring: Inspect the dishwasher’s heating element circuit for any loose or damaged wiring. Secure or repair the connections as needed.
  • Verify the heating element: Use a multimeter to check the resistance of the heating element.
  • If the reading is significantly off, the heating element may be faulty and require replacement.

11. “HE2” Error Code:

What it means: The “HE2” error code indicates a problem with the dishwasher’s temperature sensor.

Possible Solution:

  • Inspect the temperature sensor: Check the temperature sensor for any damage or malfunction.
  • If the sensor is faulty, it may need replacement.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments

Final Thoughts

Remember, when dealing with error codes on your Samsung dishwasher, it’s essential to refer to the user manual for your specific model to find detailed instructions for troubleshooting and resolving the issues.

If you are uncertain or unable to resolve the problem on your own, don’t hesitate to seek professional help from a qualified technician to ensure the proper functioning of your dishwasher.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments

Related Articles

References