Bissell upright vacuums are renowned for their efficiency in keeping our homes spick and span. However, even the most reliable appliances can encounter issues from time to time.
In this guide, we’ll explore some common problems associated with Bissell upright vacuums and provide you with practical troubleshooting tips to ensure your cleaning routine remains smooth and hassle-free.
Bissell Upright Vacuum Issues: 7 Common Problems (Solved)
Based upon our experience and research here are the most common Bissell Upright Vacuum issues with troubleshooting.
Bissell Upright Vacuum Not Turning On
Bissell Upright Vacuum not turning on is commonly caused by faulty power supply, damaged cord, or malfunctioning part.
Discovering that your trusty Bissell upright vacuum isn’t turning on can be a perplexing moment.
Don’t worry; we’re here to guide you through a friendly troubleshooting journey to revive your vacuum and get it back to its efficient cleaning ways.
1. Check the Power Source
Problem: Sometimes, the simplest solutions are the most effective. Ensure that your vacuum is properly connected to a power source.
Possible Solution:
- Check the power cord for any visible damage. If you find any, refrain from using the vacuum until the cord is repaired or replaced.
- Confirm that the outlet you’re using is functional. Plug another device into the same outlet to test it.
2. Reset the Vacuum
Problem: Electrical issues or a tripped motor protector can cause your Bissell vacuum to shut off unexpectedly.
Possible Solution:
- Locate the reset button on your vacuum, usually near the motor or on the bottom. Press it to reset the vacuum.
- If your vacuum has a thermal protector, allow it to cool down for at least 30 minutes before attempting to turn it on again.
3. Check the Power Switch
Problem: A faulty power switch might be the culprit behind the unresponsive Bissell vacuum.
Possible Solution:
- Ensure the power switch is in the “on” position. Sometimes, it might accidentally get switched off during use.
- Toggle the power switch back and forth a few times to see if it engages.
4. Inspect the Circuit Breaker
Problem: A tripped circuit breaker can disrupt power flow to your vacuum.
Possible Solution:
- Locate the circuit breaker in your home’s electrical panel and check if the corresponding breaker for the vacuum is in the “off” position.
- If it’s tripped, reset it by switching it to the “on” position.
5. Examine the Motor Brushes
Problem: Worn-out motor brushes can hinder the vacuum’s ability to start.
Possible Solution:
- Consult your user manual to locate the motor brushes.
- If they appear worn down, consider replacing them following the manufacturer’s guidelines.
Discovering why your Bissell upright vacuum isn’t turning on is often a matter of methodical troubleshooting.
By following these friendly tips, you’ll likely pinpoint the issue and breathe new life into your vacuum.
If issues persist, don’t hesitate to consult your user manual or reach out to professional appliance technician for assistance.
A little patience and persistence can go a long way in reviving your vacuum and keeping your home clean and tidy. Happy cleaning!
Bissell Upright Vacuum Loss of Suction Power
Bissell Upright Vacuum loss of suction power is commonly caused by a clog in the suction system, full dustbin or obstructed brush roll.
Possible Solution:
- Check for Clogs:
One of the primary culprits for diminished suction is a clog in the vacuum’s system. Here’s what you can do:
- Hose Inspection:
- Disconnect the hose and visually inspect it for any obstructions.
- Use a broomstick or a long, thin object to gently remove any lodged debris.
- Filter Examination:
- Filters play a crucial role in maintaining suction power. Check for clogs or accumulated dirt in both the pre-motor and post-motor filters.
- Clean or replace filters according to the manufacturer’s recommendations.
- Clear the Pathways:
- Examine the brush roll and any other air pathways for clogs. Clear away any debris that might be impeding airflow.
- Empty the Dustbin:
An overloaded dustbin can significantly reduce suction efficiency. Make sure to:
- Regularly empty the dustbin before it reaches its maximum capacity.
- Clean the dustbin thoroughly to ensure proper airflow.
- Inspect the Brush Roll:
A malfunctioning or obstructed brush roll can contribute to loss of suction. Follow these steps:
- Turn off the vacuum and unplug it for safety.
- Check the brush roll for tangled hair, strings, or debris. Remove any obstructions.
- Ensure the brush roll spins freely and is properly aligned.
- Filter Maintenance:
Filters are the unsung heroes of your vacuum’s suction power. Pay attention to:
- Regularly cleaning or replacing filters is vital for optimal performance.
- Follow the user manual guidelines for filter maintenance.
- Examine Seals and Gaskets:
Leaky seals or damaged gaskets can lead to loss of suction. Inspect and address:
- Check for any visible damage to seals or gaskets. Replace them if necessary.
- Ensure a proper seal between different components of the vacuum.
Conclusion:
Your Bissell upright vacuum is designed to tackle dirt and debris effectively, and with a bit of proactive maintenance, you can keep it operating at peak performance.
By addressing these common causes of suction loss, you’ll not only restore your vacuum’s power but also extend its lifespan.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Bissell Upright Vacuum Brush Roll Not Spinning
Bissell Upright Vacuum brush roll not spinning is commonly caused by debris or tangled hair around the brush roll.
Your Bissell upright vacuum is a workhorse, but what happens when its brush roll encounters issues?
Fear not, as we’re here to guide you through common problems and provide friendly, informative solutions to ensure your vacuum continues to deliver top-notch performance.
1. Brush Roll Not Spinning
Problem: If the brush roll isn’t spinning, your vacuum may struggle with deep cleaning.
Possible Solution:
- Check for debris or tangled hair around the brush roll. Clear any obstruction.
- Inspect the drive belt connecting the brush roll to the motor. If it’s loose or damaged, replace it following the user manual.
Now we have answered the main question, let’s dive into other issues relating to brush roll
2. Noisy Brush Roll
Problem: Unusual noises during operation can indicate a problem with the brush roll.
Possible Solution:
- Inspect the brush roll for any foreign objects causing the noise. Clear away any debris.
- Lubricate the brush roll bearings if they seem stiff or noisy. A little maintenance can go a long way in ensuring a smooth operation.
3. Brush Roll Slows Down or Stops While Vacuuming
Problem: If the brush roll slows down or stops during use, it can impact the overall cleaning efficiency.
Possible Solution:
- Check for blockages in the brush roll, such as hair or debris. Clear any obstructions.
- Ensure the drive belt is properly tensioned. If it’s loose, adjust or replace it according to the user manual.
4. Uneven Brush Roll Height
Problem: An uneven brush roll can lead to uneven cleaning results.
Possible Solution:
- Adjust the brush roll height to the appropriate setting for the type of flooring you’re cleaning. Most Bissell upright vacuums have adjustable height settings.
- Clean the brush roll regularly to prevent debris buildup that might affect its alignment.
5. Brush Roll Won’t Turn Off
Problem: If the brush roll continues spinning even when the vacuum is in the upright position, it can cause unnecessary wear and tear.
Possible Solution:
- Check for obstructions around the foot of the vacuum that might be preventing the automatic shutoff mechanism
- Inspect the foot release pedal to ensure it’s functioning correctly. Lubricate or replace it if needed.
Conclusion:
Your Bissell upright vacuum’s brush roll is a crucial component in maintaining a clean home, and addressing these common problems will keep it performing at its best.
Regular maintenance, prompt troubleshooting, and a bit of TLC will ensure that your vacuum continues to be a reliable partner in your cleaning routine.
If issues persist, don’t hesitate to consult your user manual or reach out to professional appliance technician for assistance. Happy cleaning!
Bissell Upright Vacuum Unpleasant Odors
Bissell upright vacuum having unpleasant odors is typically caused by full dustbin, dirty filters or clogged vacuuming system.
1. Empty the Dustbin
An overloaded dustbin can be a breeding ground for odors.
Possible Solution:
- Regularly empty the dustbin to prevent the accumulation of dirt, debris, and pet hair.
- Clean the dustbin thoroughly with mild detergent and water to eliminate lingering odors.
2. Clean or Replace Filters
Problem: Dirty or clogged filters can contribute to unpleasant smells.
Possible Solution:
- Refer to your user manual for instructions on cleaning or replacing filters.
- Clean or replace filters regularly to maintain optimal airflow and prevent odors caused by trapped particles.
3. Check for Clogs
Problem: Obstructions in the hose, brush roll, or other airflow pathways can lead to stagnant odors.
Possible Solution:
- Inspect the hose, brush roll, and other air pathways for clogs.
- Remove any debris or obstructions to ensure proper airflow and prevent odors.
4. Freshen Up with Essential Oils
Problem: Sometimes, a simple solution can add a pleasant fragrance to your vacuum.
Possible Solution:
- Add a drop of your favorite essential oil to the filter or dustbin for a refreshing scent
- Ensure that the oil is compatible with your vacuum and won’t damage any components.
5. Clean the Brush Roll
Problem: A dirty or clogged brush roll can contribute to odors and affect cleaning performance.
Possible Solution:
- Turn off the vacuum and unplug it for safety.
- Remove the brush roll and clean it thoroughly to eliminate any trapped debris or hair.
- Allow the brush roll to dry completely before reattaching it.
6. Inspect Seals and Gaskets
Problem: Damaged seals or gaskets can allow odors to escape.
Possible Solution:
- Check for any visible damage to seals or gaskets and replace them if necessary.
- Ensure a proper seal between different components of the vacuum to prevent odors from escaping.
Conclusion:
Your Bissell upright vacuum is designed to make your home cleaner and fresher, and addressing unpleasant odors ensures it continues to do so.
By following these friendly troubleshooting tips, you’ll not only eliminate odors but also maintain a clean and inviting living space.
If issues persist, consult your user manual or reach out to Bissell’s customer support for further assistance. Freshen up your cleaning routine, and happy vacuuming!
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Bissell Upright Vacuum Overheating
Bissell upright vacuum overheating is typically caused by overloaded dustbin, obstructions or dirty filters.
Overheating can occur, but fear not – we’ve got some friendly troubleshooting tips to help you understand and address this issue, ensuring your vacuum stays cool and effective.
1. Identify the Signs of Overheating
Problem: Your vacuum shuts off unexpectedly, emits a burning smell, or feels excessively hot during use.
Possible Solution:
- Turn off the vacuum immediately and unplug it from the power source.
- Allow the vacuum to cool down for at least 30 minutes before attempting to use it again.
2. Check for Clogs
Problem: Obstructions in the hose, filters, or brush roll can lead to reduced airflow and cause your vacuum to overheat.
Possible Solution:
- Inspect the hose, filters, and brush roll for any debris or clogs.
- Remove any obstructions using a broomstick or other suitable tools.
- Regularly clean filters and clear pathways to maintain optimal airflow.
3. Empty the Dustbin
Problem: An overloaded dustbin can impede airflow and contribute to overheating.
Possible Solution:
- Empty the dustbin regularly, especially if it’s nearing full capacity
- Clean the dustbin thoroughly to ensure unobstructed airflow.
4. Check the Filters
Problem: Clogged or dirty filters can restrict airflow and cause the vacuum motor to overheat.
Possible Solution:
- Refer to your user manual for instructions on cleaning or replacing filters.
- Ensure you’re using the correct type of filter recommended for your vacuum model.
5. Inspect the Brush Roll
Problem: A malfunctioning brush roll can increase the workload on the motor, leading to overheating.
Possible Solution:
- Turn off the vacuum and unplug it for safety.
- Examine the brush roll for debris or tangled hair. Clear any obstructions.
- Ensure the brush roll spins freely and isn’t impeded by any foreign objects.
6. Consider Operating Conditions
Problem: Using the vacuum for extended periods without breaks can contribute to overheating.
Possible Solution:
- Avoid prolonged, continuous use. Take breaks to allow the vacuum motor to cool down.
- If you have a large cleaning task, consider dividing it into smaller sessions with breaks in between.
Conclusion:
Your Bissell upright vacuum is designed for efficient cleaning, and addressing overheating issues ensures it continues to perform optimally.
By following these troubleshooting tips, you’ll not only prevent overheating but also extend the life of your vacuum.
If issues persist, don’t hesitate to consult your user manual or reach out to professional appliance technician for assistance
A cool and well-maintained vacuum is the key to a clean and comfortable home. Happy cleaning!
Bissell Upright Vacuum Difficulty in Maneuvering
Your Bissell upright vacuum having difficulty maneuvering is commonly caused by debris or hair caught in the wheels or drum roll.
Now we have answered the main question, let’s dive into troubleshooting.
1. Inspect the Wheels
Problem: If the vacuum is hard to push or pull, the wheels might be the culprit.
Possible Solution:
- Check the wheels for debris, hair, or any obstructions hindering their movement.
- Clean the wheels thoroughly and ensure they can rotate freely.
2. Examine the Brush Roll
Problem: A malfunctioning or obstructed brush roll can affect the vacuum’s ability to move smoothly.
Possible Solution:
- Turn off the vacuum and unplug it for safety.
- Check the brush roll for tangled hair, strings, or debris. Remove any obstructions.
- Ensure the brush roll spins freely and is properly aligned.
3. Adjust the Height Setting
Problem: Incorrect brush roll height for your flooring type can lead to maneuverability issues.
Possible Solution:
- Most Bissell upright vacuums come with adjustable height settings. Check your user manual to find the correct setting for your specific flooring.
- Adjust the height setting to ensure the brush roll makes optimal contact with the floor.
4. Inspect the Hose
Problem: If the hose is kinked or obstructed, it can impede the vacuum’s movement.
Possible Solution:
- Check the hose for any kinks or bends that might restrict airflow.
- Remove any obstructions inside the hose using a broomstick or a flexible tool.
5. Lubricate Moving Parts
Problem: Over time, moving parts like swivels and hinges may become stiff, affecting the vacuum’s maneuverability.
Possible Solution:
- Locate moving parts, such as swivels and hinges, and apply a small amount of silicone-based lubricant.
- Ensure all moving parts are well-lubricated to facilitate smooth operation.
6. Check for Obstructions in the Pathway
Problem: Obstructions in the vacuum’s pathway can make it difficult to maneuver.
Possible Solution:
- Examine the vacuum’s pathway, including the area around the brush roll, for any debris or foreign objects.
- Clear away any obstructions to ensure unimpeded movement.
Conclusion:
Your Bissell upright vacuum is designed to make cleaning a joy, and by addressing these common causes of difficulty in maneuvering, you can restore its smooth operation.
Regular maintenance, prompt troubleshooting, and a bit of care will ensure your vacuum glides effortlessly, making your cleaning routine efficient and enjoyable.
If issues persist, don’t hesitate to consult your user manual or reach out to professional appliance technician for assistance
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Bissell Upright Vacuums Any Good?
Absolutely! Bissell upright vacuums are very good. They have earned a reputation for being reliable and efficient cleaning tools.
Known for their innovative features and user-friendly design, Bissell vacuums consistently deliver impressive performance across various surfaces.
One standout feature is their powerful suction capabilities, ensuring thorough dirt and debris removal.
Bissell also prioritizes user convenience with features like easy-to-empty dustbins, versatile attachments, and adjustable height settings to accommodate different flooring types.
Additionally, many models come equipped with advanced filtration systems, making them an excellent choice for households with allergy concerns.
Bissell’s commitment to quality and customer satisfaction is evident in the positive reviews from users who appreciate the durability and effectiveness of their upright vacuums.
So, if you’re in the market for a reliable and high-performing vacuum, Bissell upright models are certainly worth considering for a clean and fresh home environment.
Bissell Upright Vacuums Pros and Cons
Bissell Upright Vacuums Pros
- Powerful Suction: Bissell upright vacuums are renowned for their strong suction power, making them effective in picking up dirt, debris, and pet hair from various floor surfaces.
- Versatility: These vacuums are designed to tackle a variety of surfaces, including carpets, hardwood floors, and tiles. The versatility makes them suitable for different rooms within your home.
- Innovative Technologies: Bissell integrates cutting-edge technologies into their upright vacuums. Features like OnePass Technology, which ensures thorough cleaning in a single pass, and Multi-Cyclonic Technology, preventing loss of suction, enhance the overall performance.
- Specialized Models: Bissell offers specialized models tailored to address specific cleaning needs. Some models are equipped with features like a Febreze filter for odor elimination or a TurboBrush tool for effective upholstery cleaning.
- Large Dirt Bins: Many Bissell upright vacuums come with generously sized dirt bins, reducing the frequency of emptying and allowing for extended cleaning sessions without interruption.
- Affordable Options: Bissell provides a range of upright vacuum models at different price points, making them accessible to a broad consumer base without compromising on quality.
Bissell Upright Vacuums Cons
- Weight and Size: Some Bissell upright vacuums can be bulky and heavy, making them less maneuverable, especially in tight spaces or when carrying them up and down stairs.
- Corded Design: Many Bissell upright vacuums rely on a corded design, which can limit the range of cleaning and may require access to multiple power outlets for larger areas.
- Noisier Operation: Compared to some other vacuum brands, Bissell upright vacuums may produce more noise during operation, which could be a concern for those who prefer quieter cleaning sessions.
- Maintenance Requirements: While Bissell vacuums are generally durable, regular maintenance is essential. Filters need to be cleaned or replaced, and occasionally, belts may require adjustment or replacement.
- Limited Reach for Attachments: Though Bissell provides various attachments, the reach and flexibility of these tools may be limited, making it challenging to clean certain nooks and crannies effectively.
Final Thoughts
Owning a Bissell upright vacuum is a fantastic investment in maintaining a clean and healthy home environment.
By addressing these common problems with our troubleshooting tips, you can ensure your Bissell vacuum continues to perform at its best.
Remember, regular maintenance and attentive care are key to a long-lasting and effective cleaning companion.
If issues persist, always refer to your user manual or reach out to a professional for further assistance. Happy cleaning!
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Related Articles
- Shark Vacuum Problems: 7 Common Issues (Answered)
- Miele Vacuum Power Head Not Working (Answered)
- Dyson Cordless Vacuum Problems: 7 Common Issues (solutions)
