GE Fridges Problems: 7 Common Issues (Must Read)

GE is a name known to many in the appliance world, and ever since you were little, you might have heard your grandma sing praises of this remarkable brand that refuses to leave your side.

We are confident that we will be able to identify your cooling problems and perhaps even bring your Fischer & Paykel refrigerator’s cooling back.


Here are some common problems with GE refrigerators today:

Not too dissimilar to other fridge brands.

GE Fridge Not Cooling Freezer Is Fine

Common reasons for the GE refrigerator not cooling it is not plugged in properly, the door not closing tightly, the seals being broken, the vents being clogged, or the condenser being unclean or broken.

This issue can be a switch turned off, or the plug is incorrectly lodged inside the socket.

Another reason can be a defective fuse caused by irregular wiring.

Possible Solution(s):

  • Double-check to ensure that the power switch is correctly turned on and the power cable is correctly connected to the electrical socket.
  • Fridge doors that do not close properly and damaged or worn-out seals are common causes of refrigerators not cooling.
  • Check the door switch, since most refrigerators prefer not to run the condenser unless the door is positively closed.
  • If your refrigerator is in direct sunlight or close to a heat source, consider relocating it if possible.
  • A set of condenser coils can be found at the back of your Miele refrigerator.

When these coils become dusty or freeze over, they can prevent your refrigerator from cooling.

Cleaning the condenser coils is thankfully simple; simply do the following:

Remove your GE refrigerator from the wall.

  • Turn off the power.
  • Remove the condenser coils’ cover.
  • If the coils are encrusted with ice, turn off your refrigerator and wipe away any excess water. Clean the coils if they are covered in dust.
  • After they’ve been defrosted or cleaned, replace the coil cover, turn on the power, and see if your fridge now cools properly.

For a more detailed step-by-step troubleshooting guide see this article GE Fridge Not Cooling: 7 Common Reasons (with solutions)

GE Refrigerator Stopped Making Ice

A common problem with GE refrigerators is that they stopped producing ice, which owners get used to having and missing when ice is no longer available.

GE fridge stopped making ice is typically caused by valve blockages or faulty components. 

Don’t worry; simply follow the steps below to resolve the issue.

Possible Solution(s):

Inlet Valve is Blocked

The ice maker gets its water from the house’s main supply line, and a blockage in the valve that lets the water into the fridge could be the reason for your machine’s failure to manufacture ice.

So, turn off the mains water to this valve and remove the input tubing to determine whether there’s a clogged tiny debris screen on it.

If this is the case, clean the screen so that water can flow back into the ice machine.

Check the inflow tube for clogs and make sure the manual water shut-off valve is clean and clear on the inside.

Faulty Components

One of the ice maker’s components may be defective.

You may need to purchase and replace the entire ice maker assembly because many of the ice maker components are not offered separately.

Check the water intake valve, water line, and fan before replacing the ice maker unit.

Replace the ice maker assembly if none of these pieces are broken and the freezer temperature is at least 15 degrees Fahrenheit.

GE Refrigerator is Noisy or Loud

Sitting in the lounge wanting to watch your favorite show on the television and all you can hear is the hum of the fridge. It can’t be ignored however hard you try.

GE fridge making noisy or loud sounds is typically caused by a filthy compressor. 

Don’t worry; simply follow the steps below to resolve the issue.

Possible Solution(s):

Filthy Compressor

A dirty compressor is frequently the source of the loud humming. The heat is dissipated by the compressor coils in the rear of your refrigerator, but as they become caked with dust, they must work harder and louder to dissipate it.

Cleaning your compressor coils will often remedy this problem quickly.

Faulty Compressor

If you’ve cleaned the debris from the compressor and the fridge is still humming like a freight train, it could indicate a compressor problem.

When the compressor shuts off, you may also hear knocking or clunking sounds.

This is just another clue that the compressor’s internal components have failed.

GE Refrigerator No Longer Defrosting

GE fridge not defrosting is most likely caused by a malfunctioning defrost system.

Don’t worry; simply follow the steps below to resolve the issue.

Possible Solution(s):

Below are some remedies

Faulty Defrost Timer

A defrost timer is the most likely culprit. So, what exactly is the defrost timer?

The defrost timer activates the defrost heater numerous times during the day to melt any ice that has built up on the evaporator coils.

If the defrost timer is malfunctioning, the defrost cycle may not start or power to the defrost heater may be cut off during the defrost cycle.

Slowly move the dial into the defrost cycle to see if the defrost timer is malfunctioning.

The heater should be turned on and the compressor should be turned off.

The defrost timer is not progressing if the timer does not send electricity to the defrost components or advance out of the defrost cycle within 30 minutes.

Replace the defrost timer if it is not progressing.

GE Fridge Leaking Water

Occasionally GE customers report water leakage from the refrigerators, creating a mess in the kitchen and ruining hardwood floors.

GE fridge leaking water is likely to be caused by a clogged defrost train, frozen enough to disrupt the water flow.

A frozen defrost train can cause the water to leak or drip down the compartment that holds the defrost train.

To fix this issue, you can either boil the ice out or flush the drain with boiling water to get rid of the ice and any debris causing the blockage.

Another reason for water leakage can be a broken water tank.

If you find a leak in your water tank, consider replacing it entirely, as adhesive glue won’t do the job quite well due to the plastic nature of the tank.

If your refrigerator is still leaking, you can check the water inlet valve to see if it is in working condition.

A loose crack fit can cause the water to drip down from the valve, so ensure that you tightly screw it in place or replace it if broken.

GE Fridge Door Not Closing Properly

Cold air can escape, and warm air can enter the compartment if the refrigerator door does not close tightly or create a proper seal. Condensation can form inside the refrigerator, causing the compressor to work harder than required.

The majority of these repairs are neither difficult nor expensive. Your user manual will detail any adjustments you can make safely and without voiding your warranty, but if in doubt, consult a specialist.

GE fridge door not closing properly due to worn seals, tilted hinges, crisper drawers sticking out, or misaligned shelves.

Don’t worry; simply follow the steps below to resolve the issue.

Possible Solution(s):

  • Check inside the fridge to ensure that the crisper drawers and shelves are properly positioned and are not protruding and preventing the door from closing. After checking, make sure no cartons or containers (milk bottles, for example) are sticking out and preventing the door from closing properly. If you’re still having issues, proceed to the next step.
  • Examine the rubber door seal (gasket). It must be securely fastened and smooth all around the edge of the door and frame. If it’s loose or twisted, you may be able to reposition it temporarily, but it should be replaced.
  • Check that your appliance is properly balanced. If the floor is not level, use a spirit level and adjust the feet. The back of the fridge should be slightly lower than the front.

If the problem persists, it is best to contact a qualified technician.

How Long Should a GE Fridge Last?

GE refrigerators are known to last between ten to 18 years, with an average lifespan of 14 years.

Although these numbers aren’t the best in the market, they are respectable enough for any quality-conscious customer to consider the GE fridges as their daily home driver.

Are GE Fridges Any Good?

Yes. GE has built up a reputation for excellence, quality, and innovation over the years, and its fridges come well-equipped with the latest technological advancements.

GE’s focus on customer satisfaction has made them one of the giants of the current appliance market, and it’s only bound to get better.

If you’re someone in need of a reliable fridge that will last for more than a decade, GE is an excellent choice.

What Do the Reviews Say?


We have a nice GE, and it’s been fine for the past year.

I’ve heard too many horror stories about LG and Samsung, so I steered clear. I purchased it through Costco for a great price plus a very cheap seven-year warranty.


Consumer reports consistently rank the GE models higher.

We’ve had great luck with the last two we’ve purchased (we left one when we sold our house last year).


We got our GE Profile fridge after a long wait (backorder).

It’s beautiful and functional, and I love the door-in-door feature (I thought I wouldn’t use it).

The backlight makes everything easy to find, and the middle drawer makes drinks accessible. Goodbye forever, Samsung!!


Pros and Cons of GE Fridge

Here are some of the pros and cons of the GE Fridges


  • Highest-quality material construction
  • Affordable pricing
  • Spacious models
  • Smart refrigerator lineup
  • Durability matches the biggest names in the market, such as Samsung, GE, etc.


  • Older models have less space
  • Limited innovation
  • Stale finishes


Here we conclude this brief article about the common problems in GE refrigerators and some detailed information regarding their value, quality, and feasibility as your home companion.

We hope you can troubleshoot your GE fridge and get it working again in a snap.

Remember to call a technician if the solution requires opening up the machine and accessing internal components. Good luck!

Related Articles


Image by Freepik