Dryer Not Drying My Clothes? 7 Common Problems (with solutions)

by

We lead hectic lives that include chasing after the kids, working, and taking care of our homes.

Thankfully, we have modern conveniences like dryers to make life simpler.

Without it, laundry would need a lot more time and effort.

But when they begin to falter, it is terrible.

Check out the most common causes of a dryer not drying your clothing before you think about buying a new one or phoning a technician.

Dryer Not Drying My Clothes?

The most common causes of a dryer not drying clothing are an overloaded dryer, a clogged lint filter, and wet laundry when it comes out of the washer.

x

Let’s review the most common reasons why clothes are coming out of the dryer still wet.

Dryer Overloaded with Too Many Clothes

One of the most frequent causes of a dryer that needs many cycles to dry is overloading.

Drying takes longer because there is less space for the hot air to flow in the dryer due to the packed-in nature of the garments.

Not to mention that having too many garments can wear out your dryer’s parts and cause a malfunction.

For instructions from the manufacturer on the capacity of your dryer, we suggest consulting your owner’s handbook.

Following these recommendations and drying two loads rather than one that is overloaded will help you save time and money on repairs.

Check The Selected Program and Functions

Your garments may not always be drying because you chose the incorrect cycle or too little heat.

By selecting the incorrect cycle, you run the risk of damaging your dryer’s heating element, fuses, thermostat, and sensors.

If you use timed drying and discover that it takes longer than an hour for your clothes to dry, you may be using the incorrect cycle.

Follow these steps to select the ideal cycle:

  1. To select the ideal cycle for your load, refer to the user handbook.
  2. Increase the heat settings or select a sensor cycle by making changes.
  3. Pause the drying cycle, and measure how wet the clothes are.

Lint Screen Needs to Be Cleaned

Every time our clothing is dried, a small amount of fabric fiber is lost. These fibers are blown about and into the lint screen by the hot air from the dryer.

Longer drying times may result from improper hot air circulation when the screen is clogged with lint.

Clean your lint screen after each drying cycle to maximize airflow.

The screen may be simply removed, the lint picked out with your hand or a paper towel and then replaced.

Your Washer Might be to Blame

Your washer may be to blame if you discover that your garments are still damp after washing. If you choose a wash setting without a spin cycle or one with an inadequate spin cycle, your clothes will be too moist for the dryer.

Therefore, a typical drying cycle is insufficient to dry these objects. Another possibility is that the clothes are too damp after washing due to a machine fault.

Make sure your settings include a long enough spin cycle before starting a wash cycle. After washing, if the clothing is still excessively moist, professional washer repair may be necessary.

 

Related Articles

 

Clogged Dryer Vent

The accumulation of lint and debris inside exhaust vents is a typical reason why dryers take too long to dry clothes.

In addition to reducing airflow in the dryer and extending drying times, clogged dryer vents can increase the risk of dangerous dryer fires.

These obstructions might happen if the lint screen isn’t cleaned frequently or if your dryer vent pipes aren’t cleaned once a year.

Follow these actions and this advice to prevent dryer fires if your dryer takes an eternity to dry and the vent requires cleaning:

  1. Disconnect the dryer’s vent hose.
  2. Vacuum the vent pipe from both ends, including the exterior, using a narrow hose vacuum attachment.
  3. Remove the outer exhaust hood and clean the hood entrance of lint and debris.
  4. Reattach the dryer’s vent hose and replace the exhaust hood.
  5. Make sure the vent hose is free of damage or pinches before cleaning it.Additionally, ventilation could be restricted, and drying durations could be prolonged if the vent hose is pinched or squashed.

Moisture Sensor Needs Cleaning

The moisture sensor in a dryer keeps track of how damp the garments are and modifies the drying time to avoid over or under drying.

Normally situated next to the lint filter, the moisture sensor can accumulate dirt over time from lint and other debris.

When this occurs, it is unable to detect the level of moisture in clothing accurately, lengthening the drying cycle.

Fortunately, the moisture sensor’s functionality can be recovered by cleaning it.

To get rid of lint and grime, we advise cleaning it down using a cloth wet with water and white vinegar.

Before replacing the sensor, let it thoroughly dry off.

Problem With Incoming Power

Check your power source if your dryer isn’t drying your clothing thoroughly. An essential contrast between gas and electric dryers is the latter’s need for a 240V socket to supply sufficient electricity.

Normal 120V outlets provide less electricity, which results in drying durations that may be three times longer.

Additionally, avoid running your dryer off of an extension cord.

The quantity of power needed by a dryer is too much for a regular extension cord to handle securely.

Related Articles