HAAN Steam Mop Problems: 7 Common Issues (with simple fixes)

HAAN is a renowned name when it comes to household appliances.

From kitchen tools to cleaning appliances, HAAN manufactures some of the most effective products on the market.

The HAAN steam mop is no different and can allow you to keep your home spotless with ease.

However, at times, this product can run it issues. So, continue reading below to avoid complications.

Here are 7 common issues with HAAN steam mops, along with their solutions to help you use your appliance without any problems.

HAAN Steam Mop Not Turning On

If you notice that your HAAN steam mop won’t turn on, there is probably a power problem or a problem with the mop itself.

Don’t worry, just follow the instructions below.

Possible Solution(s):

  • First off, test the power socket by plugging in the appliance in a different socket. If the appliance starts to work, you will simply need to get the main socket fixed.
  • If the appliance does not work in a different socket, check the power cable for any type of damage. You can also try replacing the power cable if you have a spare one with the same amperage and voltage.
  • Lastly, you can try replacing the fuse located inside the appliance. It’s possible that the fuse blew out and is halting the power supply to the other components.

If it’s still not working, it probably has an internal problem. It is best to get advice from HAAN.

HAAN Steam Mop Keeps Turning Off

Another common issue with HAAN steam mops is that they can constantly turn on and off at times.

This can be a frustrating issue.

Damaged mop cables or a loose power outlet are the two most common reasons for a HAAN steam mop to keep shutting off.

However, don’t worry, as here are some effective solutions you can use.

Possible Solution(s):

  • A loose power cable may be the culprit behind this issue. Check the power socket and replace the cable if it appears to be loosely fixed into the socket.
  • Additionally, an internally damaged cable may also cause this problem. If you notice any bent areas on the cable, it’s best to have it replaced.
  • If the above solutions fail to work, you will need to call in a professional to internally diagnose the components of the steam mop.

HAAN Steam Mop Not Producing Steam

When a HAAN mop doesn’t produce steam, it’s usually because not plugged into the power socket properly, the tank isn’t filled with water, or the nozzle is blocked.

Here are some steps you can take to do so.

Possible Solution(s):

  • Make sure the HAAN mop is plugged in and in a functioning outlet first. Make sure the tank has water by checking after that. It is crucial to confirm that you are ONLY filling the tank with water. The machine’s gasket and/or other components could break down as a result of alternative solutions.
  • During use, the water inside the appliance evaporates as steam, leaving behind minerals on the nozzle. Over time, the nozzle is clogged, and the steam no longer escapes. To solve this issue, you may need to decalcify the nozzle.
  • Use a vinegar solution and some paper clips to clean the nozzle and remove any sort of debris that may be clogging it.
  • If doing so doesn’t fix the issue, you may have simply forgotten to fill the tank.

HAAN Steam Mop No Heating Up

At times, your HAAN steam mop will turn on; however, it will fail to heat up the water inside and, therefore, not produce any steam either.

A broken heating element is a common reason why your HAAN steam cleaner isn’t producing steam. Your steam cleaner won’t produce any steam if the heater, which is used to heat the water, has burst or burned out.

The steamer should sound like a boiling kettle once the water tank is full and turned on.

To fix this problem and make your steam mop as good as new, follow the solutions below.

Possible Solution(s):

  • A failed heating element is the major cause behind this issue. However, before you replace this element, you will need to test it. To start doing so, first, unplug the appliance.
  • Detach the cover of the steam mop and test the two wires running from the heating element to the boiling tank using a multimeter.
  • If you notice more than 50 ohms of resistance, you will need to replace the heating element.

HAAN Steam Mop Leaking Water

Water leakages are a common issue with HAAN steam mops. They can create a mess and even increase fall hazards. However, you can fix this problem by following the effective solutions below.

Possible Solution(s):

  • One of the most common causes for water leakages is using a high steam setting, which can cause the appliance to be soaked in water, appearing as if there is a leakage. So, try to use a low steam setting to fix the issue.
  • If the problem persists, check the water tank and the cap for cracks. Additionally, also make sure the rubber gasket is tightly attached. If there are any cracks in the water tank, you will need to replace it.
  • Furthermore, try to tighten the water tank into the entire unit to stop water from leaking at the attachment.

HAAN Steam Mop Still Not Working

If your HAAN steam mop does not work even after trying all the solutions mentioned above, it may be facing a serious issue related to internal components. 

In such a situation, it’s best to refer to the user manual that came with the appliance, as it may contain some important information about fixing complicated issues. 

However, if the user manual is not helpful, call an expert, preferably from HAAN themselves. If the warranty of the product is still valid, taking help from a HAAN expert should be your priority.

HAAN Steam Mop Leaving Streaks on Floor

HAAN steam mops leaving streaks on tiles or floorboards are most likely caused by a dirty mop or leaving the mop on the floor for an extended period.

Sticky floors after steam mopping are commonly caused by residue from cleaning products used on the floor. Using a dirty mop pad can also result in sticky floors.

Possible Solution(s):

  • Always sweep or vacuum your floors thoroughly before using the mop.
  • Replace the mop pads on a regular basis to prevent dirt and grime from being transferred to another area. Furthermore, if the pad becomes too wet, it can leave streaks.
  • Do not let the mop pad stand on a spot for longer than 15 seconds otherwise, it may create a white circle on the floor. If this happens, use a cloth and a few drops of white vinegar to remove the stain.
  • As needed, replenish the mop’s water tank. When the tank is empty, the mop will usually stop producing steam.

How Long Do HAAN Steam Mops Last?

HAAN steam mops can last around 7 years.

However, you can further add to their lifespan through better care and frequent maintenance. 

HAAN Steam Mops any Good?

Yes, HAAN steam mops are very good. Even the dirtiest floors can be cleaned with HAAN steam mops because they are lightweight, easily maneuverable, quickly produce steam, and are simple to use.

Pros and Cons of HAAN Steam Mops


  • Affordable
  • Micro-fiber pads are washable.
  • Durable
  • Heats up quickly (under thirty seconds).


  • The detachable water tank is hard to pull off the main unit.


What the Reviews Say


Floor dries as soon as I move to next area, can walk on it right away. Maybe it’s because it’s an older model, but mine works great. The hardest thing is finding the micro pads that fit.

Source: www.productreview.com.au


I could do kitchen and bathrooms no problems. Great cleaner but for 3 years worth it is a little steep in price. Did a better job than just a mop and bucket.

Source: www.productreview.com.au


I was after a steam mop which did not leave excess water on the floor, this model is not only easy to use, it cleans well and leaves only minimal water which quickly drys.

Source: www.productreview.com.au



HAAN is undoubtedly a company you can trust when buying household appliances such as steam mops.

After all, HAAN’s steam mops come equipped with the latest technology and several useful features.

However, just like all appliances, steam mops are also prone to failure.

So, keep in mind the solutions and common problems mentioned above to keep your steam mop in working condition.