JennAir Oven Problems: 7 Common Issues (with solutions)

While Jenn-Air may not be as well-known as other brands, it can certainly provide high-quality kitchen appliances.

JennAir ovens are well known for their high-quality, well-designed products.

JennAir ovens, like all machines, appliances can fail and cause headaches for you.

Kinetico Water Softener Problems â€...
Kinetico Water Softener Problems – Top 15 issues and solutions – All about Water
However, there is no need to be concerned because the problems and solutions are listed below.

JennAir Oven Not Working

If your JennAir oven is not working, it is most likely due to an electrical failure. A bad power cable connecting to the outlet, a malfunctioning power socket, or a fuse that has tripped the circuit breaker could all be to blame.

No matter what buttons you press on the control panel, the oven won’t seem to work.

In such a situation, try out the following solutions.

Possible solution(s):

  • Ensure the power cable is plugged in properly and the socket works.
  • Check that the Control Lock feature is turned off. Control Lock may be available on some ovens. On the oven control console, look for “Control Lock,” then reset by pushing and holding for 3 seconds. Look in the Table of Contents of your Owner’s Manual for the Control Lock feature for your specific model.
  • Check if the circuit breaker has been tripped due to a power surge and flip it back on.
  • Replace the thermal fuse if all other measures fail.

If the troubleshooting steps above did not resolve the issue, you will need to contact a technician.

JennAir Oven Not Heating

If your food is taking too long to cook or not cooking at all, your oven might have a heating issue with your oven.

You can be certain about this by cooking a batch of food as a test to check the heating.

JennAir Oven not heating is often caused by faulty ignition, worn heating elements, or objects obstructing the convection fan. 

To fix your oven, follow the solutions mentioned below.

Possible solution(s):

  • Check the bake element for cracks and inconsistent red glows. If the element appears to be defective, replace it with the help of a professional.
  • Check the convection fan for obstructions and ensure its motor works; otherwise, replace the motor.

For more in-depth information check out the article below

JennAir Oven Taking Too Long to Heat Up

A common problem mainly with older JennAir ovens is they can take too long to heat up.

Slow heating of an electric oven can also indicate a variety of issues with the appliance.

One of the most likely causes is a leak of hot air from the oven.

Possible Solution(s):

Damaged oven door seal: The seal is attached to the oven door and ensures that when the door is closed, it forms an airtight seal.

This allows the oven to trap all of its hot air. When the seal is damaged, hot air escapes, and the healing process is delayed.

Oven door hinges that are damaged: Hinges allow the door to open and close easily while remaining perfectly aligned with the rest of the appliance.

When they become bent or broken, the door is unable to close securely, preventing the oven from trapping heat inside.

As a result, hot air escapes and the oven takes an inordinate amount of time to reach cooking temperatures.

If you have found the Frigidaire oven to be properly sealed, then it’s likely to be a result of a power supply issue, faulty main control board, or heating element being worn out.

If that’s the case best to call out a repair person to check it out.

JennAir Oven Baking Unevenly

At times, you will notice your oven-cooked food to be unevenly baked.

This is a common problem with JennAir ovens that are often disguised as cooking mistakes.

JennAir ovens baking unevenly are typically caused by the bake element being burnt out, only the broil element will heat the oven. As a result, the oven will heat unevenly. When the bake element is properly heated, it glows red hot.

Following the solutions mentioned below will allow you to cook food evenly again.

Possible solution(s):

  • Look for holes or blisters to determine whether the baking element has burned out as it will be obviously damaged. Using a multimeter, check the bake element for continuity to see whether it has burned out. Replace the baking element if it lacks continuity.
  • Debris can often get stuck between the blades of convection fans and stop it from circulating hot air around the oven for an even temperature. So, you may be able to solve this problem by removing debris.
  • However, removing debris doesn’t help; test the fan motor for continuity using a multimeter. If there is no current passing, replace the motor and fix the connection to it.

JennAir Oven Temperature Inaccurate

If your food is coming out to be undercooked or overcooked, chances are you’re experiencing a common problem with Jenn-Air ovens.

From time to time, Jenn-Air ovens can start to function at inaccurate temperatures.

But you can solve this problem using the solutions below.

Possible solution(s):

  • Faulty heating elements that include the igniter and the bake element can contribute to an inaccurate temperature. Test the heating elements and get them replaced to fix your oven.
  • If the problem persists, the thermostat may be the culprit behind the problem. However, testing and replacing a thermostat can be tricky. So, get a professional to do the job for you.

JennAir Oven Interior Light Not Switching On

The interior light of a JennAir oven can be quite useful while cooking, as it allows you to ensure your food is properly cooked.

So, it can be quite frustrating when it doesn’t turn on. But on the bright side, it’s quite easy to fix this issue most of the time.

Possible solution(s):

  • All you need to do is check if the bulb has burnt out or not and replace it if it has. 
  • However, sometimes, there may be a problem with the bulb socket, which can also be replaced with ease. 

JennAir Oven Light Stays Off

The oven light is an incredibly useful tool to ensure your food is cooked properly.

However, at times, you will notice your oven’s light remaining off while it’s running.

If that’s the case, try following the solutions below to fix the issue.

Possible solution(s):

  • It’s possible the light bulb has blown out. To test it, take out the bulb and try turning it on in another socket. If the bulb doesn’t turn on, replace it to fix your oven.
  • If the bulb appears to be working as expected in another socket, the oven’s socket may be faulty. Use a multimeter to test if the current is passing through the socket wires. Call a professional to fix the internal disconnection if there is no current passing.

JennAir Oven Not Self-Cleaning

Self-cleaning can be quite helpful when it comes to removing tough stains and odors from your oven.

However, once it stops working, keeping your JennAir oven clean can get challenging.

So, refer to the solutions below to bring self-cleaning back into action.

Possible solution(s):

  • Self-cleaning features are designed to only work when the oven has cooled down. Try using the self-cleaning feature once the oven has cooled if you haven’t been doing so.
  • However, if the oven doesn’t clean even while it’s cool, there may be an issue with the oven door latch. Call in a professional to fix the door latch.

JennAir Oven Broiler is Not Working

The broiler is a great feature that allows you to cook particular foods to perfection.

However, Jenn-Air ovens can have a problem regarding the broiler which is typically caused by damaged elements. 

If your oven’s broiler appears to be dysfunctional, follow the solutions below.

Possible solution(s):

  • Check if the broil element has been damaged. You can do so by observing whether or not it glows red hot. A faulty broil element may also have holes and blisters. If the broil element appears to be faulty, replace it.
  • If the broil element is working fine, the igniter may be at fault. Test the igniter and replace it if it turns out to be broken.

JennAir Oven Control Panel Not Working

JennAir ovens come with a control panel that includes several important buttons and options that can allow us to cook with ease and convenience.

However, if even one of those buttons stops working, it’s almost impossible to use the oven.

After all, there is no way to set the temperature or start cooking without the use of the control panel.

Possible solution(s):

To fix your control panel, start by checking the connections of wires to the control panel.

However, make sure to turn off the oven before doing so as a safety measure.

If you don’t notice any faults with the wiring, check the printed circuit board for faults and clean it.

JennAir Door Not Closing Properly

Unfortunately, the door of an oven not closing properly is a common issue.

You must first determine what is preventing the door from closing.

  • Latch issues: a broken latch that may need to be replaced. When trying to force the door open, some locks might be clumsy and flimsy on some oven models.
  • Hinge Issues: Over time, rust and debris can cause the hinges on an oven door to become stiff. Attempt to keep these lubricated and clean. You could try moving the frame to realign the hinges if you think your door hinges have been broken or knocked out of alignment.
  • Oven frame: Over time, regular heating and cooling of your oven might potentially lead to issues with your oven door. As a result, the framework may shift, and even a tiny movement could lead to a lock or latch failure. Repositioning the frame might be aided by tightening the screws.
  • Worn door seal will also make it difficult for the door to remain closed and sealed. This needs to be replaced to stop heat loss from the interior of the oven, as oven seal detachment is one of the causes of extended cooking times.

If you are unable to fix these yourself best to call out a technician to take a look at the door.

JennAir Oven Overheating

JennAir oven overheating issues are commonly caused by a faulty thermostat which is responsible for regulating heat inside the oven.

A faulty cooling fan will also result in the oven becoming too hot.

Oven vents, control panels, temperature sensors, and selector switches are all familiar culprits – and can all be repaired or replaced by your trusted technician.

How Long Do JennAir Ovens Last?

JennAir ovens are made using premium components and stylish designs.

With that said, the JennAir oven will last between 10 and 15 years, demonstrating its dependability. 

The best part is that by concentrating on routine maintenance and wise use, you may lengthen the lifespan of your oven.

Are JennAir Ovens Any Good?

Yes, JennAir ovens are very good, in fact, JennAir wall ovens compete with all other leading brands in terms of performance, design, and convenience, but proudly outperform them in terms of connectivity and smart features.

JennAir wall ovens have the most advanced wifi connectivity features, as well as one of the best app integrations in the industry.

JennAir is an excellent choice for users with a large home or buyers looking for mid to high-end kitchen appliances with select high-class technology, innovation, and value.

What Do the Reviews Say?

Our last Jennair lasted a long time and this new one is sleek. Can’t wait to learn all the bells and whistles.

Source: www.bestbuy.com

 

Excellent upgrade/replacement from our original Jenn-Air, hopefully, this one will last another 15 years.

Source: www.bestbuy.com

 

I replaced a 20-year-old Jenn Air oven with this one, and I love it. I love this brand!

Source: www.bestbuy.com

 

Pros and Cons of JennAir Ovens

Here are some of the pros and cons of the JennAir Ovens

Pros

  • Combination Wall oven and microwave
  • Luxurious, premium brand
  • Well built
  • High tech with wifi and app connection
  • Controls and display are handled by a large touch screen.
  • Effective self-cleaning

Cons

  • Expensive

Conclusion

Jennair has a wide range of reliable ovens that can make a significant difference in your kitchen.

So, if you’re looking to buy an oven, Jennair should be on your priority list.

However, if you face any complications with your Jennair oven, you might find the solution to the problems mentioned above.

Related Articles

References