KitchenAid Stand Mixer Problems: 7 Common Issues (with solutions)

It’s undeniable that your KitchenAid mixer works with remarkable efficiency.

Toaster
Toaster

Making your favorite cuisine or preparing the dough minimizes the overall workload.

What if, though, it ceased to function appropriately when you attempted to use your mixer or failed to turn it on?

But don’t be concerned—we’ve got you covered.

Here’s how to repair your KitchenAid stand mixer without calling in a technician.

KitchenAid Stand Mixer Not Turning On

A functional KitchenAid mixer should switch on immediately after hitting the on/off switch.

Your KitchenAid stand mixer probably isn’t connected, or there’s an issue with the outlet or wire if it won’t turn on.

Solutions

  • Begin by inserting another functioning gadget into the outlet to inspect the outlet. If the appliance is inoperative, you must plug your mixer into a separate outlet.
  • As an alternative, verify that the breaker control for that specific socket is not switched off to provide electricity to the stand mixer.
  • The power cord might be broken if none of those above-mentioned fixes succeed. If the power cable is faulty, you can use a multimeter to test it and have it replaced.

 

KitchenAid Stand Mixer Not Locking In

I understand how frustrating it can be to fiddle around with trying to get your KitchenAid stand mixer to lock in.

The whisk on a swivel base mixer is too high, which causes the KitchenAid stand mixer to not lock in., preventing the tip from latching into the correct location.

To prevent spills from unrestricted movement, you must lock the mixer’s blade in a downward position before mixing.

Solutions

  • If the beater on a tilt head mixer is set too high, the head may not lock into place. The locking mechanism does not have to move all the way to the end to lock the head into place. Lowering the beater almost always resolves the locking mechanism issue if the head lifts.

KitchenAid Stand Mixer Stopped Working

Your KitchenAid mixer may be experiencing an internal problem if it has suddenly ceased functioning or isn’t rotating after being turned on.

Solutions

  • A malfunctioning, overworked motor is the most prominent cause. You will require professional assistance if you want to replace the motor.
  • If the motor is functioning well, dismantle the stand mixer and check that the wires to the speed regulation board and the phase adjustment board are firmly connected.

 

KitchenAid Stand Mixer Making Loud Noise

When mixing, a KitchenAid stand mixer will typically create some noise.

However, if your KitchenAid stand mixer is noisier than usual, it’s likely because some meal particles or another external item became stuck in the mixer.

You can dismantle the KitchenAid stand mixer to examine the innards and discard the item.

Solutions

  • Check there is not meal particles or objects in the bowl or around the mixer.
  • A broken worm gear is generally the most obvious cause of this issue. To lessen the noise, consider changing the worm gear.
  • If the problem is not from the worm gear, you must apply fresh grease to the mixer’s bearings and scrape the old grease.

KitchenAid Stand Mixer Not Spinning

When you turn on your KitchenAid stand mixer and it fails to spin around it is likely to have an internal problem.

Solutions

  • A shabby worm gear, crucial to the spinning process, is typically to blame when your KitchenAid stand mixer stops working.
  • You must disassemble the mixer from the head to exchange the worn gear with a newer one to repair the mixer.

If you are not comfortable tinkering with the internal mechanisms, or if you do not want to void the warranty, it is best to return the mixer or consult a technician.

KitchenAid Stand Mixer Speed Control Problems

There is a problem with the core components of your KitchenAid mixer if it only spins at a few speeds and not at others.

Moreover, if the mixer is going too fast or too slow, then there is an underlying speed control issue that you need to consider.

The screws on the speed adjustment panel frequently come loose, which leads to the mixer only operating at high speed despite being set to slow and vice versa.

Solutions

  • The mixer will frequently revert to normal speeds when you open it up and reset the head screws.
  • Changing the speed control panel and the speed regulation phase board may be necessary if changing the bolt does not solve the problem.

If you are not comfortable tinkering with the internal mechanisms, or if you do not want to void the warranty, it is best to return the mixer or consult a technician.

KitchenAid Stand Mixer Not Reaching Bottom of Bowl

If the dough is not being mixed adequately in your KitchenAid stand mixer or if you notice that the paddle does not quite touch the edges or base of the bowl when mixing, the mixer requires adjustment.

Solutions

  • Tilt Head mixers have a screw just below where the head connects to the stand. Find the screw, unplug your mixer and tilt the head up. A slight clockwise (right) turn lowers the beater, while a counter clockwise (left) turn raises it.
  • Bowl-lift models have an adjustment screw on the lower portion of the stand, which you can see after unplugging the unit by placing the bowl’s lift handle in the down position. Lowering the beater is done clockwise (right), while raising it is done counter-clockwise (left).

When testing your adjustment, make sure the flat beater just clears the bowl. If you over- or under-corrected, the bowl may not lock properly in place, or you may hear the beater hit the bowl’s sides or bottom. If this occurs, you may need to slightly counteract the adjustment to correct it.

KitchenAid Stand Mixer Still Not Working?

Numerous problems with KitchenAid mixers can be fixed using the methods indicated above.

But occasionally, the issue may be more mechanical in nature, necessitating a different approach.

If that applies to you and your KitchenAid stand mixer still doesn’t function after trying every one of the fixes mentioned above, you might need to call a professional.

However, you should also try reading the stand mixer’s user handbook. Then, fix the issue following the repair methods in the user handbook.

How Long Do KitchenAid Stand Mixers Last?

The quality and engineering of KitchenAid are well known; even now, their mixers last a very long period. The average mixer lifespan, according to KitchenAid, is 15 years.

However, a mixer might last for 30 years or beyond under the appropriate circumstances.

It relies on how well it is maintained and how recurrently it is used.

How to Maintain KitchenAid Mixer?

Your mixer’s longevity is greatly influenced by care and upkeep; therefore, you must take every precautionary measure to keep it in good condition.

The importance of maintaining the mixer increases as its use increases within the household.

  • If your mixer overheats, it should automatically turn off, but it’s normally preferable to prevent this from happening.
  • Make sure to give your mixer some time to warm up if you haven’t used it before mixing actual food items.
  • Ensure your beaters are the proper height before using the KitchenAid stand mixer because they are also height adjustable.
  • When you use your KitchenAid mixer, globs of oil inside the appliance grease the machine’s gears, but as time passes, this lubricant becomes polluted and less useful. So, you should re-grease your mixer once every year if you want it to survive as long as possible.

Are KitchenAid Mixers Any Good?

Every article that lists the “best stand mixer” places KitchenAid at the top. These publications are correct, after all. KitchenAid is the industry benchmark for stand mixers.

They are adaptable, effective appliances created by a well-known company.

KitchenAid mixers are great investments because they can shred, grate, whip, knead, and crush in addition to mixing.

In addition, you can use them to prepare various meals because of the abundance of available attachments.

Pros and Cons of KitchenAid Mixers

Here are some pros and cons of KitchenAid mixers

Pros

  • The versatility of a stand mixer, which includes a variety of attachments, makes it useful for various tasks.
  • The deep, spacious bowl that stand mixers are equipped with ensures that the contents stay inside even at high speeds.
  • A stand mixer will not only make the laborious jobs swift and simple, but it may also produce batter with the ideal consistency.

Cons

  • It’s challenging to thoroughly clean a stand mixer because of the various attachment shapes.
  • KitchenAid stand mixers are costly because of their great functionality and premium construction.

Conclusion

You have got all the information required to fix your KitchenAid stand mixer.

However, before you get started, check if the warranty on your equipment is still in effect.

If you can still obtain free servicing from the manufacturer, you won’t need to be quite as daring with your mixer.

Cheers!

Related Articles 

References