The Maytag Bravos washer is known for its reliability and high-performance capabilities.
However, like any appliance, it can encounter issues from time to time.
This troubleshooting guide aims to address some of the most common problems that users may encounter with their Maytag Bravos washer.
Follow these steps to diagnose and potentially resolve these issues on your own.
Contents
Maytag Bravos Washing Machine Problems (Solved)
Maytag Bravos washing machine problems include the washer not spinning, making excessive noise, not agitating, not draining or starting.
This is not to say that if you purchase a Maytag Bravos machine you will experience these issues.
These are the most frequently encountered issues.
Other washing machine brands’ problems are not too dissimilar.
Let’s now dive into detail.
Maytag Bravos Washer Won’t Spin
If your Maytag Bravos washer is not spinning, or your Maytag Bravos washing machine clothes are wet after the cycle the problem may lie with the lid switch assembly or faulty motor.
This switch is responsible for keeping the washer halted whenever the lid is open. If the assembly has malfunctioned, the washer will not spin.
Another problem can be the motor coupling, which connects the motor with the device’s transmission.
The motor coupling can fail if the water is overloaded or generally suffers from wear and tear over time.
Possible Solution(s):
- Check the motor by putting your hand inside and feeling around, you can check the motor. The motor is definitely damaged if it seems flimsy or unsteady. In that situation, you ought to get in touch with a seasoned appliance repairman.
- Check the lid switch assembly with a multimeter for continuity. If there isn’t any, replace the assembly.
- It’s possible that the drain pump is clogged. You can inspect the drain pump by removing the bottom panel and checking the pump for any blockages
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Maytag Bravos Washer Is Making Excessive Noise
If your Maytag Bravos washing machine is making excessive noise, the problem may be with the bearings or loose objects moving around in the washing machine.
There are two bearings in the washing machine, one in the middle of the outer tub and the other inside the rear drum.
If any of these bearings fail, the washer will make excessive noise or leak from the bottom.
It could also be because you put the washer near another appliance which causes it to rattle every time it runs.
You may have placed the device on an uneven surface.
Possible solution(s):
- Check for any buttons or coins that might be tumbling around in the washing machine
- Place the washing machine on an even surface, using a spirit level to check its balanced.
- Replacing the bearing requires complete machine disassembly, which is best done by a professional
Finally, if the washer is still making weird noises, call a technician to come out and determine the source of the noise and take the necessary steps, which in most cases will be a component replacement.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Maytag Bravos Washer Won’t Agitate:
If your Maytag Bravos washing machine won’t agitate, the problem lies with the agitator repair kit more often than not.
This kit has all the components that allow the washer to stir, and once it malfunctions, you’ll run into issues.
Another reason can be a loose or damaged drive belt that isn’t functioning correctly due to wear and tear.
In that case, you should call a professional appliance repair person to take a look
Possible Solution(s):
- Replace the agitator repair kit
- Replace the drive belt
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Maytag Bravos Washer Isn’t Draining:
If your Maytag Bravos washing machine isn’t draining water, the drain pump may be clogged.
This pump is responsible for pushing out water from the hose, but often debris gets stuck inside the pipe, causing the drain not to function as intended.
The hose can also get blocked if a small piece of clothing like a sock gets stuck inside the pump.
Possible Solution(s):
- Clean the drain pump. If cleaning doesn’t solve the problem, replace it
- Remove obstruction from the drain hose.
If these solutions have worked, then it’s best to call an appliance repair person to take a look.
Related Article: Maytag Washing Machine Not Draining (Solved)
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Maytag Bravos Washer Won’t Start:
If your Maytag Bravos washing machine has power but doesn’t start, try pressing a few buttons on the main display to check if the control board is working.
Often a problem with the main control board causes the machine not to start, even when it has power.
Another reason can be a fault with the washing machine timer, as any malfunction can cause the entire machine to shut down.
Possible Solution(s):
- Replace the main control board
- Replace the faulty timer
If your Maytag Bravos washing machine does not have power, then check for a damaged power cord connecting to the outlet.
Test the power socket by using a smaller appliance, and check if the circuit breaker hasn’t tripped.
If your washing won’t start after troubleshooting the steps above, you’ll need a Maytag Bravos professional to look at the circuitry and identify the faults with the control board.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Maytag Bravos Washer Won’t Fill:
If your Maytag Bravos washer isn’t filling with water, the water inlet valve is probably the culprit.
This valve is responsible for the washer’s water supply, and it works if the pressure requirement is met, and it can fail if damaged or if the pressure is too low.
Possible Solution(s):
- You should be able to see hoses leaving the back of your washer that is attached to cold- and hot-water faucets. Check that these faucets are turned on and that the hoses leading to the unit are not kinked before continuing. Sometimes that is all it takes and doing so may only need turning on these faucets or adjusting the hose.
- Water inlet valves are the components of a washing machine that tell it when to begin or stop filling. This valve will occasionally fail and fail to signal the machine to fill. This is a relatively simple repair that normally necessitates the services of a technician
- When the water level reaches a specific level, a sensor alerts them to cease filling. These sensors can fail and alert the washing machine that the water level is too high, even if the unit is empty. The device will not fill until the sensor is repaired or replaced. This will require the services of a technician to resolve
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Maytag Bravos Washer Stops Abruptly:
If your Maytag Bravos washing machine stops abruptly mid-cycle, the door switch may malfunction, or a faulty water inlet.
The controller gives the signal to the machine to start once it’s closed, but if it fails, it’ll cause the washing machine to stop mid-cycle.
Another reason can be a faulty water inlet valve that has lost its continuity.
If the Maytag Bravos washer loses power during the cycle, make sure the power supply is properly inserted into the socket and that the circuit is not tripped.
Possible Solution(s):
- Check the power supply, making sure the washer is properly plugged into the socket. Check that the power cord is not faulty and that the circuit has not been tripped.
- Replace the door switch, which will require a technician.
- Replace the water inlet valve, which will require a technician.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Maytag Bravos Washer Leaking
The most common causes of Maytag Bravos washing machine leaking include an unlevel unit, faulty connections, a damaged pump, or a loose clamp.
Don’t worry; simply follow the steps below to resolve.
Possible Solution(s):
Maytag Bravos Washer Is Not Level
The Maytag Bravos washer could be leaking because your complete unit isn’t level, resulting in an out-of-balance washing drum.
Check that all of your washer’s legs are appropriately spaced on a solid floor.
If your legs aren’t standing equally, review your user handbook to learn how to level them.
Place a level on top of the washer and adjust the legs as needed until your machine’s legs are evenly spaced on the ground.
Water Connection Is Leaking
If you see the leakage from the machine’s bottom, the main hose connection could be to blame.
Check for leaks in the water inlet hose connections to the washer and the water valves in your home.
Tighten any loose connections and replace any damaged valves as needed.
When draped over a sink basin or attached to a sink drain or standpipe, make sure the hose is 60-90 cm high to avoid future seepage.
Defective Water Pump
A faulty water pump or hoses linked to the pump are frequently to blame for leaks under the washer.
If the pump is malfunctioning, you will typically hear a lot of rumbling or shaking coming from the appliance throughout a wash cycle.
A washer’s water pump is often found near the bottom of the appliance.
The two substantial hoses that are attached to the water pump serve as a visual cue.
If any of these connections seem slack or congested, you can visually confirm this.
Hose Clamp Loose or Missing?
Your washing machine’s drain hose should be connected to the drainage pipe that extends from your washer.
A clamp for the hose connection should be visible where they meet.
Your washing machine’s drain hose should be connected to the drainage pipe that extends from the washer.
This clamp may be hidden on the inside of some models, but it is usually visible.
If the connection feels or appears loose, or if there is no clamp or sealed connection at all, water may be leaking out of the bottom of the washer.
In most cases, tightening the water hose by hand is sufficient.
However, there may be times when a replacement part or a professional serviceman is required to complete the task.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
How Long Does Maytag Bravos Washing Machine Last?
You should be able to use a Maytag Bravos washer for up to 10-12 years with appropriate installation, level flooring, and ideal water hardness conditions.
A washing machine can obviously live more than 12 years if it is used less frequently than this, and it may not last as long if it is used more frequently.
The washer may suffer and may not last as long if you often wash heavy loads as opposed to lighter loads.
Maytag Bravos appliance warranties cover the majority of Factory Specified Replacement Parts and repair labor to correct any defects in materials and workmanship that existed within one year of the date your appliance was purchased.
Are Maytag Bravos Washers Any Good?
Yes, Maytag Bravos washers are good. Maytag Bravos washing machine line has garnered attention for its promises of innovative features and dependable performance.
In this article, we’ll delve into the question: Is the Maytag Bravos washing machine any good?
A Legacy of Dependability: Maytag’s Reputation
Maytag, a well-established brand in the appliance industry, has earned a reputation for manufacturing durable and reliable appliances. For decades, Maytag has been associated with quality, making it a trusted name in many households. The introduction of the Maytag Bravos washing machine line was met with expectations that it would uphold the company’s legacy of dependability.
Key Features of the Maytag Bravos Washing Machine
Large Capacity: The Maytag Bravos washing machines are known for their generous drum capacities. This is particularly beneficial for households with large loads of laundry, reducing the number of cycles required and potentially saving both time and energy.
PowerWash System: The PowerWash system is a central feature of the Maytag Bravos line. It is designed to deliver effective cleaning through a combination of increased water flow and thorough agitation, resulting in cleaner clothes even for heavily soiled items.
Advanced Vibration Control: Many users appreciate the advanced vibration control technology in the Maytag Bravos washing machines. This technology aims to minimize vibration and noise during the spin cycle, enhancing the overall laundry experience by reducing disruptions.
Energy Efficiency: Maytag has made efforts to improve the energy efficiency of its Bravos washing machines. While individual results may vary, energy-efficient appliances can lead to long-term cost savings and reduced environmental impact.
Variety of Cycles and Options: The Maytag Bravos line offers a range of wash cycles and customizable options to accommodate different types of fabrics and laundry needs. This versatility can be especially useful for households with diverse laundry requirements.
Final Verdict
So, is the Maytag Bravos washing machine any good? Overall, Maytag’s reputation for quality and the positive aspects of the Bravos line’s features suggest that these machines can be a reliable choice for many households.
However, as with any appliance purchase, it’s advisable to research and read user reviews specific to the model you’re considering, taking into account factors like budget, capacity needs, and desired features.
Ultimately, the Maytag Bravos washing machine line presents a compelling option for those seeking a dependable washing machine with advanced features.
While no appliance is entirely without potential drawbacks, the Maytag Bravos line’s track record and reputable brand name provide a strong foundation for making an informed decision about its suitability for your laundry needs.
Pros and Cons Maytag Bravos Washing Machine
To help make a purchasing decision on Maytag Bravos Washing Machine we have put together some Pros and Cons below.
Pros:
Durable Build and Reputation: Maytag has a long history of producing reliable and durable appliances, and the Bravos line is no exception. Many users appreciate the robust construction of these machines.
Large Capacity: The Bravos washing machines offer spacious drum capacities, making them suitable for households with larger laundry loads. This can save time and energy by reducing the number of loads required.
PowerWash System: The PowerWash system is designed to provide thorough cleaning, even for heavily soiled clothes. This feature is particularly helpful for families with active lifestyles or individuals who often deal with dirtier garments.
Energy Efficiency: Many models within the Bravos line are designed with energy-efficient features, which can lead to cost savings on utility bills over time and contribute to a reduced environmental impact.
Advanced Vibration Control: The Bravos washing machines incorporate technology to reduce vibration and noise during the spin cycle. This can make laundry routines less disruptive, especially if the machine is placed near living areas.
Variety of Wash Cycles and Options: The Bravos line offers a diverse range of wash cycles and customizable options to cater to different fabrics and laundry requirements. This versatility can enhance the user experience by providing more control over the washing process.
Steam Option: Some models of the Bravos washing machines come with a steam option. Steam can help remove tough stains and wrinkles from clothes, providing an extra level of cleaning and care.
Cons:
Longer Cycle Times: Some users have reported that certain cycles on Bravos washing machines can take longer than expected. This might be a concern for individuals seeking quick wash options.
Technical Issues: Like any appliance, there have been reports of technical problems emerging over time, including issues with sensors, control panels, or other components. However, it’s important to note that not all users experience such issues, and proper maintenance can mitigate potential problems.
Price: Maytag Bravos washing machines are often priced at a premium compared to some other washing machine brands. This might be a factor to consider for budget-conscious shoppers.
Complex Controls: Some users find the controls on certain Bravos models to be complex and less intuitive. This could lead to a steeper learning curve for operating the machine effectively.
Limited Availability: Depending on your location, you might find limited availability of Maytag Bravos washing machines, which could impact your options when shopping for one.
Water Usage: While the PowerWash system can provide effective cleaning, it might consume more water compared to machines with less aggressive cleaning mechanisms
Final Thoughts
While Maytag Bravos washing machines are known for their reliability, encountering problems is not entirely uncommon.
By familiarizing yourself with these common issues and their solutions, you can troubleshoot and resolve many problems on your own.
However, it is crucial to prioritize your safety and consult a professional technician when dealing with complex repairs or if you are unsure about the cause of the problem.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Related Articles
- Maytag Washing Machine Not Spinning (Answered)
- Maytag Washing Machine Problems: 7 Common Issues (Simple Fixes)
References
- Image by wayhomestudio on Freepik