Sunbeam Blender Problems: 7 Common Issues (Simple Fixes)

If your blender is still not working properly, check your warranty and, if necessary, return it, purchase a new blender, or seek repair from a qualified technician.

While leaks from the top can occur due to overfilling the blender jar and can easily be fixed, bottom leaks can be quite frustrating.

However, the solutions mentioned below can help you fix this issue with ease.

Possible Solution(s):

• Check the sealing ring at the bottom of the jug is correctly placed sealing the contents within the jug.

• The most common culprit behind a Sunbeam Blender is caused by a bottom leak of a broken blender jar.

• Detach the blender jar and check for any cracks. Even a hairline crack is enough to cause a leak.

• However, if the jar appears to be fine, the blender gasket responsible for making a leak-proof seal might be broken.

• Detach the jar and replace the gasket if it’s broken.

Sunbeam Blender Blade Not Spinning

If your Sunbeam blender turns on but does not start blending, you have likely overfilled your blender. 

Refer to the solutions below to fix the issue.

Possible Solution(s):

• A common reason for this issue is that you might have overfilled your blender jar, making it difficult for the blades to spin.

• Try starting the blender after taking out some food.

• If the problem persists, the fans may not be able to spin due to a lack of liquid. Add some water and then start the blender.

• If the blender still doesn’t spin, there is a mechanical problem with the drive gear and motor. Call a professional to fix the issue.

If you are unsure about any of these tasks or do not want to risk voiding your appliance’s warranty, contact a qualified technician.

Over time, you may notice your Sunbeam blender spinning slower than usual, which is usually caused by being overloaded with ingredients or having motor problems.

This can be a major issue, as it can make it quite difficult for your blender to chop food.

However, the solutions mentioned below can help you out of this problem.

Possible Solution(s):

• Make sure the ingredients are not overloading the blender. Too many solid ingredients will also make it difficult for the blades to move effectively.

• The main reason behind slow blade spinning is worn-out brushes in the blade motor. To fix the issue, you will need to replace the motor.

• However, another reason might be overfilling and a lack of water which can make it harder for the blades to rotate.

If you are unsure about any of these tasks or do not want to risk voiding your appliance’s warranty, contact a qualified technician.

Blenders can produce pungent smells at times.

If you notice a burning smell, it is no common occurrence and is indicative of a serious issue caused by faulty wiring. 

So, follow the solutions below to fix the problem.

Possible Solution(s):

• If there is any burning smell, switch off your blender before troubleshooting.

• There may be loose wires that might have short-circuited within the blender.

• However, if you don’t have the expertise to test such wires, call in a professional to fix the problem.

Blender Still Not Working?

If you have tried all the above-mentioned solutions to the problems, you are facing and the blender still fails to work, there may be a more technical issue.

To fix such issues, you will need to call a professional, preferably from Sunbeam itself.

Parts required to fix technical issues are usually only available from the issuing company.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our skilled technicians
No in-home service calls. No appointments.

How Long Do Sunbeam Blenders Last?

Like most Sunbeam products, the Sunbeam blender can between 5-10 years depending on the frequency of use and how well it is used. 

However, its lifespan can significantly decline due to poor usage and a lack of maintenance.

So, make sure to give your blender a regular inspection and keep it in good use to allow it to help you out in the kitchen for years to come.

Are Sunbeam Blenders Any Good?

In a nutshell, Sunbeam blenders are very good. They are feature-rich and have powerful motors. Sunbeam blenders are at the high end of the market.

They are well worth the investment because they outperform the competition in terms of power, durability, and versatility. Furthermore, they are long-lasting.

Sunbeam blenders are an excellent choice for the majority of kitchens.

They are not only known for their dependability and high performance, but they are also quite attractive and simple to use.

What the Reviews Say

It blends smoothies really well. Powerful motor. Good size jug.

Did start leaking brown goo from motor but as its 5 years old…no worries.

We have l9ved this blender to death and more.

Source: productreview.com.au/

Conclusion

A Sunbeam blender is a fantastic kitchen tool for blending and chopping ingredients.

Every device, even blenders, will occasionally experience problems.

However, there is no need to fret because hopefully, the remedies above have got you covered.

To ensure that you can use your Sunbeam blender easily, remember the problems and their fixes stated above.

Related Articles

• Hamilton Beach Blender Problems: 7 Common Issues (Simple Fixes)
• Vitamix Blender Problems: 7 Common Issues (Simple Fixes)
• KitchenAid Blender Problems: 7 Common Issues (Simple Fixes)

References

• Bestbuy.com
• Image by freepic.diller on Freepik

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our skilled technicians
No in-home service calls. No appointments.