If you’ve ever found yourself frustrated with a washing machine that repeatedly halts during the rinse cycle, you’re not alone.
This common issue can be caused by various factors, but fear not – we’re here to guide you through the troubleshooting process.
In this article, we’ll explore the potential reasons behind your washer’s persistent pauses during the rinse cycle and provide practical solutions to get your laundry routine back on track.
Washing Machine Stops Rinse Cycle: 7 Common Reasons (Solved)
Washing Machine stopping at rinse cycle is commonly caused by restricted water supply, drainage issues, load imbalance, or parts malfunction.
Now we have answered the main question, let’s dive into step-by-step troubleshooting.
1. Water Supply Issues
One of the most common reasons for a washer to stop during the rinse cycle is inadequate water supply.
Ensure that both the hot and cold water faucets connected to your machine are fully open. Check for kinks or obstructions in the hoses, as these can impede the water flow.
Possible Solution
Turn off the water supply, inspect the hoses for any blockages, and straighten out any kinks. If necessary, replace damaged hoses.
2. Water Inlet Valve Problems
The water inlet valve controls the flow of water into your washing machine.
If it’s malfunctioning, your washer may not be receiving the required amount of water, leading to pauses during the rinse cycle.
Possible Solution
Test the water inlet valve for proper functionality. If it’s faulty, consider replacing it with a new one.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
3. Drainage Issues
A clogged or slow-draining pump or drain hose can hinder the water evacuation process, causing the washer to pause during the rinse cycle.
Possible Solution
Check the drain hose for any obstructions and ensure it’s properly positioned. Additionally, inspect the pump filter for debris and clean it if necessary.
Related Articles
4. Load Imbalance
Unevenly distributed laundry can trigger the washer’s imbalance detection system, leading to automatic pauses to prevent damage.
Possible Solution
Reorganize the load, ensuring that items are evenly distributed around the drum. Avoid overloading the machine, as this can also contribute to imbalance issues.
Related Articles
5. Faulty Door Lock
If the door lock is malfunctioning, the washer may perceive an unsafe condition and pause during the rinse cycle.
Possible Solution
Inspect the door lock for any visible damage or misalignment. If needed, replace the door lock mechanism.
6. Electronic Control Board Malfunction
The electronic control board is the brain of your washer. If it’s experiencing issues, it may cause interruptions in the wash cycle, including the rinse phase.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Possible Solution
Consult your washer’s user manual for instructions on resetting the electronic control board. If the problem persists, consider professional repair or replacement.
Final Thoughts
In conclusion, a washing machine that keeps stopping on the rinse cycle can be a frustrating problem, but it’s often solvable with a bit of troubleshooting.
By systematically checking and addressing issues related to water supply, drainage, load distribution, and key components like the water inlet valve and electronic control board, you can identify and resolve the underlying causes.
If you’re unsure or encounter persistent problems, don’t hesitate to seek professional assistance to ensure your washing machine operates at its best. Happy laundering!
Related Articles
- Dryer Stopped Mid Cycle (Solved)
- Washing Machine Wont Spin: 7 Common Reasons
- Washing Machine: 5 Easy Steps Clean Mold and Mildew
