A clothes iron is a common household appliance that allows us to iron our clothes at home.
This device is available in a variety of configurations and is manufactured by several companies.
While it is true that it rarely has a problem, there are some instances where it may become faulty or one or more of its components may begin to malfunction.
I’ll walk you through easy actions to diagnose the heating issue with your iron.
If your Clothes Iron is not working, do this
- Ensure Iron is plugged in
- Check Temperature settings
- Check the Thermostat
- Check the heating element
Clothes Iron Not Heating Up (with solutions)
The most common reason for a Clothes Iron not heating up or working is that it has not been turned on or plugged in, as well as a faulty thermostat and heating element.
Based on our research on experience, below are the most common problems with Clothes Iron not heating up or working.
Iron Not Turning On
Make sure the Iron is plugged In
Solution: It may seem obvious, but make sure your appliance is plugged into a functioning outlet.
Examine the extension cord you’re using to see whether it might be broken.
Instead, try connecting your iron to a wall outlet. Check out one of the solutions below if your iron is still not heating up.
Make sure your appliance is hooked into a working outlet, even though it may seem obvious.
Check the extension cord you are currently using to see whether it might be damaged.
What damage warning signs should you be on the lookout for? Here are a few red flags to look out for:
- Fraying
- Bite marks
- Cracked
You’ll have to buy a new cable if the old one is damaged
Try attaching your iron to a wall outlet as an alternative. If your iron is still not heating, try one of the suggestions below.
Check the temperature setting and the indicator light
Not having the right temperature setting is a common problem.
Solution: Ensure that the temperature adjustment knob is positioned higher than the MIN setting.
If not, rotate it counterclockwise until the temperature is comfortable for you.
The thermostat indication should turn on after you plug in your iron and set the temperature.
After a few minutes, if the light is still off and the iron hasn’t heated up, the heating element may have burned out.
Most of the time, repairing the item is not worthwhile.
Faulty Thermostat
A malfunctioning thermostat is another potential cause of an iron press not operating. The thermostat is the component of an iron that regulates temperature and senses when it is getting too hot to turn off the heating.
Solution: Check the change in heating by spinning the thermostat dial to various settings.
The thermostat can be broken if you notice that there is no change or that the dial isn’t functioning properly. If the thermostat is broken, getting a replacement is simple.
Faulty Heating Element
A broken heating element is yet another potential cause of an iron press not working.
Solution: use a multimeter to look for continuity between the ends of the heating element to verify this. If you notice that there is no continuity, the element is dead, and your only choice is to buy a new iron.
However, if it does, you must also check the continuity of the other elements connected in series with it.
A broken heating element is yet another potential cause of an iron press not working.
Life Expectancy of Steam Iron
Most steam irons should last between 10 and 20 years. However, there’s a good chance that technology will advance significantly over the next two decades, so you may want to upgrade before your iron’s lifespan expires.
Most steam irons have a one-year warranty.
Conclusion
Repairing damaged cords or broken handles can often cost more than the iron itself.
Rather than attempting to repair these parts, consider replacing the iron.
Buying a replacement Steam Iron will cost you somewhere between $25 to $70 for a high-end Iron.
