Miele Front Loader Washing Machine Problems: 7 Common Issues (Must Read)

Miele is a renowned name in the appliance industry, and people from all over the globe seek out their appliances for home or commercial usage.

If you’ve given into the peer pressure and finally got your hands on a Miele washing machine, we can show you how to troubleshoot it so never you’re clueless in the face of trouble.

This article will discuss 7 common problems with Miele front-loader washing machines and their possible solutions.

Please stick with us until the end to learn all about it.

Miele Front Loader Washing Machine Problems: 7 Common Issues (Must Read)

Here’s our list of the 7 most common Miele Front Loader problems with solutions.

This is not to say that if you purchase a Miele washing machine you will experience these issues.

These are the most frequently encountered issues.

Other washing machine brands’ problems are not too dissimilar.

Miele Washer Won’t Spin 

If your Miele washer is not spinning, or Miele washing machine clothes are wet after the cycle the problem may lie with the lid switch assembly or faulty motor. 

This switch is responsible for keeping the washer halted whenever the lid is open. If the assembly has malfunctioned, the washer will not spin.

Another problem can be the motor coupling, which connects the motor with the device’s transmission.

The motor coupling can fail if the water is overloaded or generally suffers from wear and tear over time.

Possible Solution(s):

  • Check the motor by putting your hand inside and feeling around, you can check the motor. The motor is definitely damaged if it seems flimsy or unsteady. In that situation, you ought to get in touch with a seasoned appliance repairman.
  • Check the lid switch assembly with a multimeter for continuity. If there isn’t any, replace the assembly.
  • It’s possible that the drain pump is clogged. You can inspect the drain pump by removing the bottom panel and checking the pump for any blockages

Miele Washer Is Making Excessive Noise

If your Miele washing machine is making excessive noise, the problem may be with the bearings or loose objects moving around in the washing machine. 

There are two bearings in the washing machine, one in the middle of the outer tub and the other inside the rear drum.

If any of these bearings fail, the washer will make excessive noise or leak from the bottom.

It could also be because you put the washer near another appliance which causes it to rattle every time it runs.

You may have placed the device on an uneven surface.

Possible solution(s):

  • Check for any buttons or coins that might be tumbling around in the dryer.
  • Place the Dryer on an even surface, using a spirit level to check its balanced.
  • Replacing the bearing requires complete machine disassembly, which is best done by a professional

Finally, if the washer is still making weird noises, call a technician to come out and determine the source of the noise and take the necessary steps, which in most cases will be a component replacement.

Miele Washer Won’t Agitate:

If your Miele washing machine won’t agitate, the problem lies with the agitator repair kit more often than not.

This kit has all the components that allow the washer to stir, and once it malfunctions, you’ll run into issues.

Another reason can be a loose or damaged drive belt that isn’t functioning correctly due to wear and tear.

In that case, you should call a professional appliance repair person to take a look

Possible Solution(s):

  • Replace the agitator repair kit
  • Replace the drive belt


Miele Washer Isn’t Draining:

If your Miele washing machine isn’t draining water, the drain pump may be clogged.

This pump is responsible for pushing out water from the hose, but often debris gets stuck inside the pipe, causing the drain not to function as intended.

The hose can also get blocked if a small piece of clothing like a sock gets stuck inside the pump.

Possible Solution(s):

  • Clean the drain pump. If cleaning doesn’t solve the problem, replace it
  • Remove obstruction from the drain hose.

If these solutions have worked then it’s best to call an appliance repair person to take a look.

Miele Washer Won’t Start:

If your Miele washing machine has power but doesn’t start, try pressing a few buttons on the main display to check if the control board is working.

Often a problem with the main control board causes the machine not to start, even when it has power.

Another reason can be a fault with the washing machine timer, as any malfunction can cause the entire machine to shut down.

Possible Solution(s):

  • Replace the main control board
  • Replace the faulty timer

If your Miele washing machine does not have power, then check for a damaged power cord connecting to the outlet.

Test the power socket by using a smaller appliance, and check if the circuit breaker hasn’t tripped.

If your washing won’t start after troubleshooting the steps above, you’ll need a Miele professional to look at the circuitry and identify the faults with the control board.

Miele Washer Won’t Fill:

If your Miele washer isn’t filling with water, the water inlet valve is probably the culprit.

This valve is responsible for the washer’s water supply, and it works if the pressure requirement is met, and it can fail if damaged or if the pressure is too low.

Possible Solution(s):

  • You should be able to see hoses leaving the back of your washer that is attached to cold- and hot-water faucets. Check that these faucets are turned on and that the hoses leading to the unit are not kinked before continuing. Sometimes that is all it takes and doing so may only need turning on these faucets or adjusting the hose.
  • Water inlet valves are the components of a washing machine that tell it when to begin or stop filling. This valve will occasionally fail and fail to signal the machine to fill. This is a relatively simple repair that normally necessitates the services of a technician
  • When the water level reaches a specific level, a sensor alerts them to cease filling. These sensors can fail and alert the washing machine that the water level is too high, even if the unit is empty. The device will not fill until the sensor is repaired or replaced. This will require the services of a technician to resolve

Miele Washer Stops Abruptly:

If your Miele washing machine stops abruptly mid-cycle, the door switch may malfunction, or a faulty water inlet. 

The controller gives the signal to the machine to start once it’s closed, but if it fails, it’ll cause the washing machine to stop mid-cycle.

Another reason can be a faulty water inlet valve that has lost its continuity.

If the Miele washer loses power during the cycle, make sure the power supply is properly inserted into the socket and that the circuit is not tripped.

Possible Solution(s):

  • Check the power supply, making sure the washer is properly plugged into the socket. Check that the power cord is not faulty and that the circuit has not been tripped.
  • Replace the door switch, which will require a technician
  • Replace the water inlet valve, which will require a technician

Miele Washing Machine Leaking

The most common causes of Miele washing machine leaking include an unlevel unit, faulty connections, a damaged pump, or a loose clamp.

Miele Washer Is Not Level

The Miele washer could be leaking because your complete unit isn’t level, resulting in an out-of-balance washing drum.

Check that all of your washer’s legs are appropriately spaced on a solid floor.

If your legs aren’t standing equally, review your user handbook to learn how to level them.

Place a level on top of the washer and adjust the legs as needed until your machine’s legs are evenly spaced on the ground.

Water Connection Is Leaking

If you see the leakage from the machine’s bottom, the main hose connection could be to blame.

Check for leaks in the water inlet hose connections to the washer and the water valves in your home.

Tighten any loose connections and replace any damaged valves as needed.

When draped over a sink basin or attached to a sink drain or standpipe, make sure the hose is 60-90 cm high to avoid future seepage.

Defective Water Pump

A faulty water pump or hoses linked to the pump are frequently to blame for leaks under the washer.

If the pump is malfunctioning, you will typically hear a lot of rumbling or shaking coming from the appliance throughout a wash cycle.

A washer’s water pump is often found near the bottom of the appliance.

The two substantial hoses that are attached to the water pump serve as a visual cue.

If any of these connections seem slack or congested, you can visually confirm this.

Hose Clamp Loose or Missing?

Your washing machine’s drain hose should be connected to the drainage pipe that extends from your washer.

A clamp for the hose connection should be visible where they meet.

Your washing machine’s drain hose should be connected to the drainage pipe that extends from the washer.

This clamp may be hidden on the inside of some models, but it is usually visible.

If the connection feels or appears loose, or if there is no clamp or sealed connection at all, water may be leaking out of the bottom of the washer.

In most cases, tightening the water hose by hand is sufficient.

However, there may be times when a replacement part or a professional serviceman is required to complete the task.


How Long Does Miele Front Loaded Washing Machine Last?

Miele washing machine can last up to 20 years, and that’s two decades of pure bliss.

Miele is one of the most reliable brands that ensure the highest quality design and durable components.

A washing machine that is used infrequently will last longer than a washing machine that runs a cycle every day.

Are Miele Front Loader Washing Machines Any Good?

Yes. Miele offers the latest technology in their washing machines, so your laundry tasks are more effortless and seamless.

Each Miele product is put through a rigorous testing machine before selling to the customer; hence you’ll be getting a refined appliance free of any manufacturing faults.

Besides, who wouldn’t want to own a washing machine that looks straight out of a sci-fi movie scene and bodes well with your home décor?

What do The Reviews say?

My parents have two sets of Miele washers/dryers, and they’ve never had any issues.

I think they’ve made one service call in 10+ years, so I’m slightly biased in my view of their products.


I bought the set last fall. Miele did a $100 rebate on both units, and I got the refund within about two weeks of proof of purchase.

I was worried they would be small, but I can fit everything in both machines when I wash my queen-sized sheets with no problem.


I had a Miele, and I loved it. It was gentle but effective on clothes, and for someone who loves to do laundry, it was worth the extra money.


Pros and Cons Miele Front Loader Washing Machine

Here are some of the pros and cons of Miele Front Loaded Washing Machines


  • Highest Quality Construction
  • Minimum repairs
  • Commercial grade


  • Expensive repairs
  • Repairing is complex (better contact a Miele engineer)
  • High cost


So, there you have it, our complete overview of Miele washing machine problems and how to solve them.

Miele is a top name in the current electronics industry, and their products are well worth the investment cost they carry along with them.

Ensure that you read through the above text carefully, so you’re well-informed about Miele washing machines and how to troubleshoot them. Good luck!

Related Articles


Image by Freepik