Image by wayhomestudio on Freepik

Dyson Vacuum Lost Suction (Solved)

by

Dyson vacuums are known for their powerful suction and exceptional cleaning performance.

However, like any other appliance, they may encounter issues over time.

One common problem Dyson owners face is a loss of suction.

If you’re experiencing this, fear not! In this troubleshooting guide, we’ll explore the potential causes and offer effective solutions to help you restore your Dyson vacuum’s suction power.

Dyson Vacuum Not Sucking Suction (Solved)

Dyson vacuum not sucking is commonly caused by blockages, clogged filters, or a worn brush bar.

Now we have answered the main question, let’s dive into troubleshooting to get your Dyson back and sucking again!

Blockage in the Vacuum’s Air Path:

When a Dyson vacuum loses suction, it’s often due to a blockage obstructing the airflow. Follow these steps to check and clear any blockages:

Step 1: Unplug the vacuum from the power source.

Step 2: Remove the dustbin and empty it.

Step 3: Inspect the internal airways, including the hose, extension wand, and brush head, for any obstructions like debris, hair, or large particles.

Step 4: Use a long, flexible brush or a straightened coat hanger to gently dislodge and remove any blockages.

Step 5: Reattach the components and test the vacuum’s suction. If the problem persists, proceed to the next step.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.

Clogged Filters:

Dyson vacuums are equipped with filters to trap dust and allergens, ensuring cleaner air output.

However, clogged filters can impede airflow and cause suction loss.

Here’s how to address this issue:

Step 1: Consult your Dyson’s user manual to locate the filters. Typically, Dyson vacuums have two types of filters: pre-motor and post-motor filters.

Step 2: Remove the filters and tap them gently to dislodge any accumulated debris. Alternatively, you can wash the filters with lukewarm water until the water runs clear. Allow them to dry completely before reinstalling.

Step 3: Reinsert the filters and make sure they are securely in place.

Step 4: Test the vacuum’s suction. If the problem persists, proceed to the next step.

Worn or Damaged Brush Bar:

The brush bar, located at the base of the vacuum head, is responsible for agitating carpet fibers and dislodging dirt.

Over time, the brush bar can become worn or tangled, leading to reduced suction.

Try these steps to rectify the issue:

Step 1: Turn off and unplug the vacuum.

Step 2: Use scissors or a seam ripper to carefully remove any hair, fibers, or debris entangled in the brush bar.

Step 3: Inspect the brush bar for any signs of damage or excessive wear. If it’s worn or damaged, consider replacing it with a genuine Dyson replacement part.

Step 4: After cleaning or replacing the brush bar, ensure it is properly aligned and securely attached.

Step 5: Test the vacuum’s suction. If the problem persists, proceed to the next step.

Motor or Mechanical Issues: If none of the above solutions restore your Dyson vacuum’s suction, there may be underlying motor or mechanical problems.

In such cases, it’s best to contact Dyson’s customer support or bring your vacuum to an authorized service center for professional diagnosis and repair.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.

Final Thoughts

A loss of suction in a Dyson vacuum can be frustrating, but in most cases, it can be resolved by addressing common issues like blockages, clogged filters, or a worn brush bar.

By following the steps outlined in this troubleshooting guide, you can improve your Dyson vacuum’s performance and restore its powerful suction, ensuring efficient cleaning for years to come.

Remember to maintain your vacuum regularly to prevent future problems and enjoy a consistently clean home.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.

Related Article

References