Maytag Washing Machine Problems: 7 Common Issues (Simple Fixes)

Maytag has been in business for nearly 130 years.

This extensive industry experience has given them the know-how to create durable, dependable washers and dryers.

However, Maytag washers, like other machines, are susceptible to breakdowns, leaving you with a pile of dirty wet clothing and feeling frustrated.

This article will examine 7 Common issues with Maytag washing machines as well as potential fixes.

Please stick with us until the end to learn all about them.

Maytag Washer Won’t Spin

If your Maytag washer is not spinning, or your Maytag washing machine clothes are wet after the cycle the problem may lie with the lid switch assembly or faulty motor. 

This switch is responsible for keeping the washer halted whenever the lid is open. If the assembly has malfunctioned, the washer will not spin.

Another problem can be the motor coupling, which connects the motor with the device’s transmission.

The motor coupling can fail if the water is overloaded or generally suffers from wear and tear over time.

Possible Solution(s):

  • Check the motor by putting your hand inside and feeling around, you can check the motor.
  • The motor is definitely damaged if it seems flimsy or unsteady.
  • In that situation, you ought to get in touch with a seasoned appliance repairman.
  • Check the lid switch assembly with a multimeter for continuity. If there isn’t any, replace the assembly.
  • You can inspect the drain pump by removing the bottom panel and checking the pump for any blockages

For further details on Maytag washing machine not spinning, check out this article we wrote

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Maytag Washer Making Excessive Noise

If your Maytag washing machine is making excessive noise, the problem may be with the bearings or loose objects moving around in the washing machine. 

There are two bearings in the washing machine, one in the middle of the outer tub and the other inside the rear drum.

If any of these bearings fail, the washer will make excessive noise or leak from the bottom.

It could also be because you put the washer near another appliance which causes it to rattle every time it runs.

You may have placed the device on an uneven surface.

Possible Solution(s):

  • Check for any buttons or coins that might be tumbling around in the washing machine
  • Place the washing machine on an even surface, using a spirit level to check its balanced.
  • Replacing the bearing requires complete machine disassembly, which is best done by a professional

Finally, if the washer is still making weird noises, call a technician to come out and determine the source of the noise and take the necessary steps, which in most cases will be a component replacement.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

 

Maytag Washer Won’t Agitate

If your Maytag washing machine won’t agitate, the problem lies with the agitator repair kit more often than not.

This kit has all the components that allow the washer to stir, and once it malfunctions, you’ll run into issues.

Another reason can be a loose or damaged drive belt that isn’t functioning correctly due to wear and tear.

In that case, you should call a professional appliance repair person to take a look

Possible Solution(s):

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Maytag Washer Isn’t Draining

If your Maytag washing machine isn’t draining water, the drain pump may be clogged.

This pump is responsible for pushing out water from the hose, but often debris gets stuck inside the pipe, causing the drain not to function as intended.

The hose can also get blocked if a small piece of clothing like a sock gets stuck inside the pump.

Possible Solution(s):

  • Clean the drain pump. If cleaning doesn’t solve the problem, replace it
  • Remove obstruction from the drain hose.

If these solutions have worked, then it’s best to call an appliance repair person to take a look.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Maytag Washer Won’t Start

The most common reasons why a Maytag washing machine won’t start are problems with the power supply, the door latch, or the water supply and drainage.

If your Maytag washing machine has power but doesn’t start, try pressing a few buttons on the main display to check if the control board is working.

Often a problem with the main control board causes the machine not to start, even when it has power.

Another reason can be a fault with the washing machine timer, as any malfunction can cause the entire machine to shut down.

Possible Solution(s):

Power Issues:

Before delving into the internal components of your washing machine, start with the basics. Ensure that the power cord is securely plugged into a functioning power outlet.

Check for any tripped circuit breakers or blown fuses that might be affecting the power supply to your appliance. If all seems well, move on to the next step.

Door Latch Problems:

If your Maytag washing machine refuses to start, it might be due to an issue with the door latch.

The machine won’t operate if the door isn’t securely closed or if the latch is faulty.

Inspect the door latch for any visible damage or misalignment. Clean the latch area and ensure that there are no obstructions preventing proper closure.

Water Supply:

A common reason for washing machine issues is a disrupted water supply. Check if the water inlet valves are open and that there are no kinks or blockages in the water hoses.

Additionally, inspect the water pressure – a low water pressure scenario can impede the proper functioning of the machine.

Address any water supply issues to ensure your Maytag washing machine has the resources it needs to operate efficiently.

Drainage Problems:

If your Maytag washing machine isn’t draining properly, it may refuse to complete its cycles. Check the drain hose for any clogs or kinks that might be obstructing the water flow.

Ensure that the hose is properly installed and that the drain pump is functioning as it should.

Cleaning the drain pump filter regularly can prevent blockages and enhance the machine’s performance.

Malfunctioning Lid Switch:

The lid switch plays a crucial role in ensuring the safety of the machine during operation. If the lid switch is faulty, your Maytag washing machine may not start or stop abruptly.

Test the lid switch by manually pressing it down to see if it clicks. If there’s no audible click, or if the switch appears damaged, it may need to be replaced.

Electronic Control Board Issues:

The electronic control board is the brain of your washing machine, coordinating various functions.

If it malfunctions, your Maytag washing machine may exhibit erratic behavior or fail to start altogether.

Inspect the control board for any visible signs of damage, such as burnt areas or loose connections. If necessary, consult your user manual for guidance on resetting the control board or consider seeking professional assistance.

If your washing won’t start after troubleshooting the steps above, you’ll need a Maytag professional to look at the circuitry and identify the faults with the control board.

Maytag Washer Won’t Fill

If your Maytag washer isn’t filling with water, the water inlet valve is probably the culprit.

This valve is responsible for the washer’s water supply, and it works if the pressure requirement is met, and it can fail if damaged or if the pressure is too low.

Possible Solution(s):

  • You should be able to see hoses leaving the back of your washer that is attached to cold- and hot-water faucets.
  • Check that these faucets are turned on and that the hoses leading to the unit are not kinked before continuing.
  • Sometimes that is all it takes and doing so may only need turning on these faucets or adjusting the hose.
  • Water inlet valves are the components of a washing machine that tell it when to begin or stop filling.
  • This valve will occasionally fail and fail to signal the machine to fill.
  • This is a relatively simple repair that normally necessitates the services of a technician
  • When the water level reaches a specific level, a sensor alerts them to cease filling.
  • These sensors can fail and alert the washing machine that the water level is too high, even if the unit is empty.
  • The device will not fill until the sensor is repaired or replaced.
  • This will require the services of a technician to resolve

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Maytag Washer Stops Abruptly

If your Maytag washing machine stops abruptly mid-cycle, the door switch may malfunction, or a faulty water inlet. 

The controller gives the signal to the machine to start once it’s closed, but if it fails, it’ll cause the washing machine to stop mid-cycle.

Another reason can be a faulty water inlet valve that has lost its continuity.

If the Maytag washer loses power during the cycle, make sure the power supply is properly inserted into the socket and that the circuit is not tripped.

Possible Solution(s):

  • Check the power supply, making sure the washer is properly plugged into the socket. Check that the power cord is not faulty and that the circuit has not been tripped.
  • Replace the door switch, which will require a technician
  • Replace the water inlet valve, which will require a technician

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Maytag Washer Leaking

The most common causes of Maytag washing machine leaking include an unlevel unit, faulty connections, a damaged pump, or a loose clamp.

Don’t worry; simply follow the steps below to resolve.

Possible Solution(s):

Maytag Washer Is Not Level

The Maytag washer could be leaking because your complete unit isn’t level, resulting in an out-of-balance washing drum.

Check that all of your washer’s legs are appropriately spaced on a solid floor.

If your legs aren’t standing equally, review your user handbook to learn how to level them.

Place a level on top of the washer and adjust the legs as needed until your machine’s legs are evenly spaced on the ground.

Water Connection Is Leaking

If you see the leakage from the machine’s bottom, the main hose connection could be to blame.

Check for leaks in the water inlet hose connections to the washer and the water valves in your home.

Tighten any loose connections and replace any damaged valves as needed.

When draped over a sink basin or attached to a sink drain or standpipe, make sure the hose is 60-90 cm high to avoid future seepage.

Defective Water Pump

A faulty water pump or hoses linked to the pump are frequently to blame for leaks under the washer.

If the pump is malfunctioning, you will typically hear a lot of rumbling or shaking coming from the appliance throughout a wash cycle.

A washer’s water pump is often found near the bottom of the appliance.

The two substantial hoses that are attached to the water pump serve as a visual cue.

If any of these connections seem slack or congested, you can visually confirm this.

Hose Clamp Loose or Missing?

Your washing machine’s drain hose should be connected to the drainage pipe that extends from your washer.

A clamp for the hose connection should be visible where they meet.

Your washing machine’s drain hose should be connected to the drainage pipe that extends from the washer.

This clamp may be hidden on the inside of some models, but it is usually visible.

If the connection feels or appears loose, or if there is no clamp or sealed connection at all, water may be leaking out of the bottom of the washer.

In most cases, tightening the water hose by hand is sufficient.

However, there may be times when a replacement part or a professional serviceman is required to complete the task.

How Long Does Maytag Washing Machine Last?

You should be able to use a Maytag washer for up to 10-12 years with appropriate installation, level flooring, and ideal water hardness conditions.

A washing machine can obviously live more than 12 years if it is used less frequently than this, and it may not last as long if it is used more frequently.

The washer may suffer and may not last as long if you often wash heavy loads as opposed to lighter loads.

The manufacturer’s warranty for Maytag appliances includes the Maytag 10-year Limited Parts warranty, which covers the replacement of specific parts for 10 years, which is one of the best warranty terms on the market.

For further warranty information check out the Maytag website.

Are Maytag Washers Any Good?

Yes, Maytag washers are very good. Washers are remarkably economical and deliver value for your money, just like every product Maytag makes.

Those who like an efficient, traditional agitator wash operation are frequently ardent Maytag supporters. Nevertheless, HE impeller washers are kinder to clothing and are growing in acceptance among buyers and producers.

The most recent Maytag front-load washers are fashionable and cutting-edge in terms of technology.

Laundry is made much simpler by convenient features, such as an automatic detergent dispenser and a drum that continuously refreshes clothing when you don’t have time to move them.

What do The Reviews say?

I adore it. Very well done.

The day before Thanksgiving, my other Maytag washer died after 18 years of service.

The floor is covered in water! Was ecstatic to receive my new one.

Source: bestbuy.com

 

Although I’m still getting used to the washer sensor (the old one didn’t have one), the clothes wash up well.

The spin cycle is amazing. We adore our new set to the fullest.

Source: bestbuy.com

 

Very straightforward to set up, with no problems so far.

A little quieter than my previous washer, and I’m delighted with the capacity.

Source: bestbuy.com

 

Maytag Washing Machine Pros and Cons

It’s always recommended to research specific models, read user reviews, and consider your specific needs before making a purchase decision.

With that said, to help you make an informed decision, here are some of the pros and cons of Maytag Washing Machines

Pros of Maytag Washing Machines:

Durability and Reliability:

Maytag washing machines are often praised for their durability and reliability.

They are built with quality materials and designed to withstand heavy use, making them a popular choice for households with large families or frequent laundry needs.

Cleaning Performance:

Maytag washing machines are known for their excellent cleaning performance.

They offer various features and advanced technologies such as powerful agitators, stain removal options, and customizable cycles, ensuring thorough cleaning of clothes.

Large Capacity:

Maytag offers washing machines with large capacities, allowing you to wash more laundry in a single load.

This feature is particularly beneficial for those who have bulky items or a large number of clothes to wash, as it saves time and energy.

Energy Efficiency:

Maytag has made efforts to improve the energy efficiency of their washing machines.

Many models are Energy Star certified, meaning they meet strict energy efficiency guidelines set by the Environmental Protection Agency (EPA). Energy-efficient machines help reduce utility bills and minimize environmental impact.

Innovative Features:

Maytag incorporates various innovative features in their washing machines, such as steam cleaning, allergen removal, and specialty cycles.

These features cater to specific needs and enhance the overall laundry experience.

Cons of Maytag Washing Machines:

Higher Price Range:

Maytag washing machines are often priced at a higher range compared to some other brands.

While they offer excellent performance and durability, the upfront cost may be a deterrent for budget-conscious consumers.

Limited Variety:

Compared to some competitors, Maytag has a more limited range of washing machine models available.

This might restrict your options if you’re looking for specific features or customization choices.

Noise Level:

Some users have reported that certain Maytag washing machine models can be relatively noisy, especially during certain cycles or with heavy loads.

However, this can vary depending on the specific model.

Long Cycle Times:

In certain cases, Maytag washing machines have been criticized for longer cycle times compared to other brands. T

his might be a consideration if you prioritize quicker laundry cycles.

Customer Service:

While this can be subjective, some customers have expressed concerns about Maytag’s customer service, citing difficulties in getting timely assistance or resolving issues.

It’s worth noting that experiences with appliances can vary, and individual preferences may differ.

Final Thoughts

So, there you have it: our complete troubleshooting guide for your Maytag washer so you’re always prepared in the event of a problem.

If you have a fault, carefully read the article and contact a skilled technician.

Cheers!

Related Articles

References

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.