Phillips Kettle Problems: 7 Common Issues (Simple Fixes)

by

If you like to enjoy a warm cup of coffee or tea, getting a Phillips kettle is one of the best decisions you can make.

After all, it’s built with quality and design in mind, creating a high-performance and well-built kettle.

However, like all appliances, kettles can also sometimes run into issues, and the Phillips kettle is no different.

So, make sure to continue reading to save yourself from such situations.

Phillips Kettle Not Boiling

If your Phillips kettle switches off before the water starts to boil or provides lukewarm water, then there’s something wrong with its heating mechanisms. Here are some solutions to help you fix this issue.

Possible Solution(s):

  • Limescale buildup is one of the most common culprits behind this issue. Descaling your kettle can help solve this problem.
  • Fill your kettle with white vinegar and water and switch on the heating, leaving the solution to rest overnight after the heating stops.
  • Then pour out the solution and clean the kettle with a sponge, rinsing it a few times with vinegar.
  • If descaling doesn’t help, the issue could be due to a faulty thermostat. To fix this problem, you will need to call a professional.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Phillips Kettle Leaking from Bottom

Leaks around the base of the kettle can be quite dangerous to their proximity to electrical components.

Unseen cracks caused by wear and tear are the most common cause of Phillips kettle leakage from the bottom.

It’s crucial to fix this issue as soon as possible by following the solutions mentioned below.

Possible Solution(s):

  • The first step to fixing this issue is to find where the leak is coming from.
  • To do so, you will need to fill the kettle and keep it dry from all areas except the suspected spot of the leak.
  • Observe the leak and trace it back to the opening. You may need to detach the base of the kettle if you don’t see a crack.
  • Once you’ve found out the source of the leak, use a silicone sealant to close the opening.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Phillips Kettle Keeps Switching On

If your Phillips kettle keeps switching on by itself and fails to turn on when you try to do so, there are some faulty electrical components inside.

However, there’s nothing to worry about, as you can fix the issue using the following solutions.

Possible Solution(s):

  • The most common reason behind this issue is faulty on/off switches. It’s possible to fix a faulty switch by replacing it.
  • To do so, switch off your kettle from the main plug and unscrew the handle of the kettle to gain access to the switch.
  • Carefully pull out the switch and replace it with the new one to allow it to work normally.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Phillips Kettle Not Turning Off

At times you might notice your kettle boil without turning off after it’s done.

This is not only dangerous but can also cause your energy bill to rise.

So, refer to the solutions below to deal with this issue.

Possible Solution(s):

  • One of the most common reasons for the Phillips kettle not turning off is a loose lid. If the kettle’s lid isn’t properly closed, the water won’t reach boiling temperature soon enough. So, make sure to tightly close the lid before boiling.
  • Additionally, limescale accumulation can also cause your kettle’s boiling time to increase. If closing the lid doesn’t solve the issue, descale your kettle with vinegar.
  • Overfilling your kettle to the point the water enters the steam tube can cause it to continue boiling without switching off. So, keep in mind not to make this mistake.

Phillips Kettle Switch Won’t Stay Down

Another common issue with Phillips kettles is a switch that won’t stay down.

No matter how much you push it down, it won’t stay in place.

The most common cause of the Phillips kettle switch not staying down is a faulty switch located inside the kettle.

Possible Solution(s):

  • To fix the issue, you will need to replace the faulty switch.
  • Simply disassemble your kettle after switching off the power and replace the switch with a new one.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.

Phillips Kettle is Not Turning On

If your kettle isn’t turning on, no matter what button you try to press, you may be experiencing a common issue with Phillips kettles.

Phillips kettle not turning on is usually caused by a faulty power cord or a tripped circuit breaker.

Here are some possible solutions to help you out of this problem.

Possible Solution(s):

  • The first thing you should do to solve such a problem is to check whether your main power socket is working or not. To do so, try plugging in your kettle in a different socket.
  • If the kettle still doesn’t power on, ensure the circuit breaker hasn’t been tripped.
  • If everything appears to be in place and your kettle is getting power, there’s an internal issue that requires a professional to be fixed.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.

Phillips Kettle Lid Not Closing

Loose lid can be a major issue when it comes to kettles, as it limits their functionality.

Phillips kettle lid, not closing is likely to be caused by faulty springs.

If you’re experiencing a similar issue, follow the solutions below.

Possible Solution(s):

  • To start fixing your kettle’s lid, detach the cap of the lid by pushing it off.
  • Then find the latch and replace its spring or fit the spring back into its place.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.

How Long Do Phillips Kettles Last?

Phillips is a renowned company in the market of kitchen appliances, and for a good reason.

After all, it’s known to manufacture reliable products using high-quality materials.

So, it’s safe to say your Phillips kettle will last for years to come.

Additionally, you can increase its lifespan through frequent maintenance.

Are Phillips Kettles Any Good?

In short Phillips kettles are good. Phillips kettles quickly boil water and has settings built into the large, elegant, curved handle that can be programmed by pressing one or two buttons.

Phillips is a well-known brand that specializes in small kitchen appliances and their kettles are highly rated among customers.

So, it’s safe to say that Phillips kettles are very good. 

Pros and Cons of Phillips Kettles

Here are some pros and cons of Phillips kettles.

Pros of Philips Electric Kettle:

  • Build Quality: Philips is known for producing high-quality appliances, and their electric kettles are no exception. They are typically well-built, durable, and designed to withstand regular use.
  • Fast Boiling: Philips electric kettles often feature powerful heating elements, enabling them to heat water quickly. This can be particularly useful when you need hot water in a hurry, such as when making tea, coffee, or instant meals.
  • Safety Features: Philips incorporates various safety features into their electric kettles. These may include automatic shut-off when the water reaches boiling point, boil-dry protection to prevent damage if there is insufficient water in the kettle, and cool-touch handles to minimize the risk of burns.
  • Capacity Options: Philips offers electric kettles in different capacities to suit varying needs. Whether you need a smaller kettle for personal use or a larger one for a family or office, you can find a suitable size from their range.
  • Cordless Design: Many Philips electric kettles have a cordless design with a detachable base. This allows for easy pouring and serving without the hassle of a cord getting in the way. The kettle can be easily lifted off the base for serving and then placed back to continue heating.

Cons of Philips Electric Kettle:

  • Price: As a reputable brand known for its quality, Philips electric kettles can be relatively more expensive compared to some other brands on the market. However, the higher price may be justified by the durability and features offered.
  • Limited Features: While Philips electric kettles generally perform their primary function of boiling water effectively, they may lack some advanced features found in more premium models. For example, some kettles from other brands may offer variable temperature settings or different brewing options.
  • Design Options: The design aesthetics of Philips electric kettles might not be as varied or diverse as some other brands. If you’re specifically looking for a kettle that matches your kitchen decor or has a unique appearance, you may find limited options within the Philips range.
  • Maintenance: Like any electric kettle, Philips models may require regular cleaning to prevent mineral buildup and ensure optimal performance. Some users have reported difficulty in cleaning hard-to-reach areas, particularly if the kettle has a narrow spout.
  • Noise Level: Depending on the specific model, some Philips electric kettles can produce a noticeable amount of noise during operation. While this may not be a significant concern for everyone, it’s worth considering if you prefer a quieter kitchen environment.

Remember, when purchasing an electric kettle, it’s important to compare various models, consider your specific needs, and read customer reviews to make an informed decision.

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.

Conclusion

When it comes to kettles, Phillips takes the top spot thanks to its high-performance, reliable, and appealing kettles.

However, while it’s a good idea to get a Phillips kettle, you must be prepared to fix some common issues regarding its functionality.

So, keep in mind the solutions mentioned above.

Cheers!

Related Articles

References

Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.