If you like to enjoy a warm cup of coffee or tea, getting a Sunbeam kettle is one of the best decisions you can make.
After all, it’s built with quality and design in mind, creating a high-performance and well-built kettle.
However, like all appliances, kettles can also sometimes run into issues, and the Sunbeam kettle is no different.
So, make sure to continue reading to save yourself from such situations.
Sunbeam Kettle Not Boiling
If your Sunbeam kettle switches off before the water starts to boil or provides lukewarm water, then there’s something wrong with its heating mechanisms. Here are some solutions to help you fix this issue.
Possible Solution(s):
- Limescale buildup is one of the most common culprits behind this issue. Descaling your kettle can help solve this problem.
- Fill your kettle with white vinegar and water and switch on the heating, leaving the solution to rest overnight after the heating stops.
- Then pour out the solution and clean the kettle with a sponge, rinsing it a few times with vinegar.
- If descaling doesn’t help, the issue could be due to a faulty thermostat. To fix this problem, you will need to call a professional.
Sunbeam Kettle Leaking from Bottom
Leaks around the base of the kettle can be quite dangerous to their proximity to electrical components.
Unseen cracks caused by wear and tear are the most common cause of Sunbeam kettle leakage from the bottom.
It’s crucial to fix this issue as soon as possible by following the solutions mentioned below.
Possible Solution(s):
- The first step to fixing this issue is to find where the leak is coming from.
- To do so, you will need to fill the kettle and keep it dry from all areas except the suspected spot of the leak.
- Observe the leak and trace it back to the opening. You may need to detach the base of the kettle if you don’t see a crack.
- Once you’ve found out the source of the leak, use a silicone sealant to close the opening.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Sunbeam Kettle Keeps Switching On
If your Sunbeam kettle keeps switching on by itself and fails to turn on when you try to do so, there are some faulty electrical components inside.
However, there’s nothing to worry about, as you can fix the issue using the following solutions.
Possible Solution(s):
- The most common reason behind this issue is faulty on/off switches. It’s possible to fix a faulty switch by replacing it.
- To do so, switch off your kettle from the main plug and unscrew the handle of the kettle to gain access to the switch.
- Carefully pull out the switch and replace it with the new one to allow it to work normally.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Sunbeam Kettle Not Turning Off
At times you might notice your kettle boil without turning off after it’s done.
This is not only dangerous but can also cause your energy bill to rise.
So, refer to the solutions below to deal with this issue.
Possible Solution(s):
- One of the most common reasons for the Sunbeam kettle not turning off is a loose lid. If the kettle’s lid isn’t properly closed, the water won’t reach boiling temperature soon enough. So, make sure to tightly close the lid before boiling.
- Additionally, limescale accumulation can also cause your kettle’s boiling time to increase. If closing the lid doesn’t solve the issue, descale your kettle with vinegar.
- Overfilling your kettle to the point the water enters the steam tube can cause it to continue boiling without switching off. So, keep in mind not to make this mistake.
Sunbeam Kettle Switch Won’t Stay Down
Another common issue with Sunbeam kettles is a switch that won’t stay down.
No matter how much you push it down, it won’t stay in place.
The most common cause of the Sunbeam kettle switch not staying down is a faulty switch located inside the kettle.
Possible Solution(s):
- To fix the issue, you will need to replace the faulty switch.
- Simply disassemble your kettle after switching off the power and replace the switch with a new one.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Sunbeam Kettle is Not Turning On
If your kettle isn’t turning on, no matter what button you try to press, you may be experiencing a common issue with Sunbeam kettles.
Sunbeam kettle not turning on is usually caused by a faulty power cord or a tripped circuit breaker.
Here are some possible solutions to help you out of this problem.
Possible Solution(s):
- The first thing you should do to solve such a problem is to check whether your main power socket is working or not. To do so, try plugging in your kettle in a different socket.
- If the kettle still doesn’t power on, ensure the circuit breaker hasn’t been tripped.
- If everything appears to be in place and your kettle is getting power, there’s an internal issue that requires a professional to be fixed.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
Sunbeam Kettle Lid Not Closing
Loose lid can be a major issue when it comes to kettles, as it limits their functionality.
Sunbeam kettle lid, not closing is likely to be caused by faulty springs.
If you’re experiencing a similar issue, follow the solutions below.
Possible Solution(s):
- To start fixing your kettle’s lid, detach the cap of the lid by pushing it off.
- Then find the latch and replace its spring or fit the spring back into its place.
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians.
No in-home service calls. No appointments.
How Long Do Sunbeam Kettles Last?
Sunbeam is a renowned company in the market of kitchen appliances, and for a good reason.
After all, it’s known to manufacture reliable products using high-quality materials.
So, it’s safe to say your Sunbeam kettle will last for years to come.
Additionally, you can increase its lifespan through frequent maintenance.
Are Sunbeam Kettles Any Good?
In short Sunbeam kettles are good. Sunbeam kettles quickly boil water and has settings built into the large, elegant, curved handle that can be programmed by pressing one or two buttons.
Sunbeam is a well-known brand that specializes in small kitchen appliances and their kettles are highly rated among customers.
So, it’s safe to say that Sunbeam kettles are very good.
What Do the Reviews Say?
Looks good …great size and volume… it boils quickly with a more than tolerable sound…with an easy short wipe to the exterior for a perfect shine.
Source: www.bestbuy.com
Pros and Cons of Sunbeam Kettles
Here are some pros and cons of Sunbeam kettles.
Pros
- Quiet when boiling
- Stainless steel finish
- Affordable
- Easy to use
Cons
- External casing can get hot
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.
Conclusion
When it comes to kettles, Sunbeam takes the top spot thanks to its high-performance, reliable, and appealing kettles.
However, while it’s a good idea to get a Sunbeam kettle, you must be prepared to fix some common issues regarding its functionality.
So, keep in mind the solutions mentioned above.
Cheers!
Related Articles
- Sunbeam Coffee Grinder Not Working (with simple solutions)
- Sunbeam Toaster Oven Not Turning On (with fixes)
- Sunbeam Coffee Machine Problems: 7 Common Issues (Simple Fixes)
References
- Image by benzoix on Freepik
- http://www.bestbuy.com
Connect with an Appliance Repair Technician
Click here to use the chatbox to speak with one of our friendly technicians
No in-home service calls. No appointments.